Haddii aad la kulanto fariinta qaladka ah ee dejinta Windows Setup wuxuu awoodi waayay inuu abuuro qayb nidaam cusub^{(Setup was unable to create a new system partition)} marka la isku dayayo in lagu rakibo Windows 10 ka ^{(Windows 10)}USB bootable , ka dibna boostada ayaa laga yaabaa inay ku caawiso.

Marka aad la kulanto arrintan. waxaad heli doontaa fariinta khaladka ah ee soo socota;

Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information.

Ciladani waxay la xiriirtaa hardware-ga waxayna ku xiran tahay Motherboard-kaaga, USB-ga ^(USB)ku^(USB) dhex jira, Usha aad isticmaalayso.

Inta lagu jiro habaynta, Windows waa in ay aqoonsataa wadista kaxayntaada koowaad si aad si sax ah u habayso MBR^(MBR) iyo bootloader. Haddii dejinta Windows - ku aanu si kalsooni leh u go'aamin karin midka boot Drive-ka, khaladkan ayaa soo muuqan doona.

Dejintu^(Setup) way awoodi wayday inay abuurto qayb cusub ama inay hesho qayb jirta

Haddii aad la kulanto arrintan, waxaad isku dayi kartaa mid ka mid ah xalalka lagu taliyey ee hoose si aad u xalliso arrinta.

1. Soo saar oo dib u geli USB-ga
2. Gacanta ku samee qaybta boot-ka

Aynu eegno sharraxaadda habka ay khusayso mid kasta oo ka mid ah xalalka taxan.

1] Soo saar oo dib u geli USB-ga

Samee kuwan soo socda:

• Markaad hesho qaladka degdega ah, sida ka muuqata sawirka hogaanka sare, ka saar USB-ga^(USB) rakibaadda Windows - ka PC.
• Ka bax saaxirka rakibaadda
• Ku laabo bogga dejinta ee ugu weyn, dooro Hadda Ku rakib^{(Install Now)} adoon dib u gelin USB-ga^(USB) .

Waxaad heli doontaa qalad degdeg ah oo ku saabsan Windows oo aan awoodin in uu helo faylasha dejinta, oo ku weydiinaya inaad ku shubto darawalka CD/DVD ee dejinta Windows si uu u sii socdo.^(Windows)

• Guji OK isla markiiba ka dibna ka bax wadahadalka dejinta mar kale si aad ugu soo laabato shaashadda ugu weyn.
• Hadda, dib u geli USB-gaada^(USB) , ka dibna dooro Hadda Hadda^{(Install Now)} mar kale.

Markan, rakibiddu waxay u socon doontaa si caadi ah.

2 ] Gacan^{(] Manually)} ku samee qaybta boot-ka

Xalkani wuxuu u baahan yahay inaad gacanta ku isticmaasho diskpart ka khadka taliska dejinta Windows si aad u nuqul ka sameysid faylasha dejinta / rakibaadda USB-ga^(USB) ilaa darawalka maxalliga ah ka dibna aad isticmaasho darawalka maxalliga ah si aad uga bilowdo oo aad u rakibto, adigoo ka gudbaya gebi ahaanba USB-ga^(USB) .

Samee kuwan soo socda:

• Riix  Shift+F10  goobta wada hadalka halkaas oo aad ku aragto fariinta khaladka ah ee su'aasha ah si aad u soo qaadato konsole-line.
• Gudaha console,  diskpart.exeku qor oo ku dhufo Gelida si aad u gasho DiskPart .
• Hadda ku qor amarradan soo socda oo ku dhufo Gelida^(Enter) khad kasta ka dib:

list disk

Qor^(Make) lambarka diskka si aad ugu rakibto Windows .

select disk=0

Meesha uu diskooga 0 yahay halka aad ku socotid, markaa ka digtoonow, dhammaan macluumaadka ku jira darawalkan waa laga saarayaa.

clean

convert mbr

create partition primary size=123

Halka 123 - waa xajmiga qaybta cusub.

select partition=1

active

format fs=ntfs quick

assign

exit

Marka xigta, ku qor amarka hoose oo ku dhufo Enter si aad u taxdo dhammaan darawalladaada.

wmic logicaldisk get caption

• U gudub ^(Navigate)USB - ga flash-ka ( USB- gaagu waxa uu ka kooban yahay gal boot). Tusaale ahaan: d:ku qor oo ku dhufo Gelida.
• Marka xigta, ku qor amarka hoose oo ku dhufo Gelida^(Enter) si aad u nuqul ka sameyso dhammaan faylasha USB drive ilaa C: drive:

xcopy d: c: /e /h /k

• Hadda, si aad C:darawalkaaga bootable ka dhigto, ku qor amarka hoose oo ku dhufo Gelida^(Enter) sadar kasta:

bootsect /nt60 c: 
bootsect /nt60 c: /mbr

• Ka saar USB Drive- ka kumbuyuutarkaaga, oo dib u bilow.
• Ku^(Boot) soo noqo dejinta Windows oo dooro hadda ku rakib^{(Install Now)} .

Rakibadu waa inay socotaa iyada oo aan wax qalad ah dhicin.

Waxaan rajeynayaa in tani ay ku caawineyso!

Setup was unable to create a new system partition error on Windows 10

If you encounter the Windows setup error message Setup was unable to create a new system partition when attempting to install Windows 10 from a bootable USB, then this post may help you.

When you encounter this issue. you’ll receive the following full error message;

Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information.

This error is hardware-related and it depends on your motherboard, your USB interface, the USB stick you are using.

During setup, Windows must identify which drive is your primary boot drive in order to correctly configure the MBR and bootloader. If the Windows setup cannot reliably determine which is the boot drive, this error will appear.

Setup was unable to create a new system partition or locate an existing partition

If you’re faced with this issue, you can try either of the recommended solutions below to resolve the issue.

1. Eject and re-insert the USB
2. Manually create the boot partition

Let’s take a look at the description of the process involved concerning each of the listed solutions.

1] Eject and re-insert the USB

Do the following:

• On getting the error prompt, as shown in the lead-in image above, unplug the Windows installation USB from the PC.
• Exit the installation wizard.
• Back at the main setup page, select Install Now without re-inserting the USB drive.

You’ll get an error prompt about Windows being unable to locate setup files, and asking you to load a CD/DVD driver for Windows setup to proceed.

• Click OK on the prompt and then exit the setup dialog once more to return to the main setup screen.
• Now, re-insert your USB drive, then select Install Now again.

This time, the installation will proceed normally.

2] Manually create the boot partition

This solution requires you to manually use diskpart from the Windows setup command line to copy the setup/installation files from the USB to the local drive and then use the local drive to both boot from and install to, bypassing the USB completely.

Do the following:

• Press Shift+F10 at the dialog where you see the error message in question to bring up a command-line console.
• In the console, type diskpart.exe and hit Enter to access DiskPart.
• Now type the following commands and hit Enter after each line:

list disk

Make note of the disk number to install Windows to.

select disk=0

Where disk 0 is your destination drive, so be careful, all information on this drive will be removed.

clean

convert mbr

create partition primary size=123

Where 123 – is the size of new partition.

select partition=1

active

format fs=ntfs quick

assign

exit

Next, type the command below and hit Enter to list all your drives.

wmic logicaldisk get caption

• Navigate to USB flash drive (your USB drive contains a boot folder). For example: type d: and hit Enter.
• Next, type the command below and hit Enter to copy all files from USB drive to C: drive:

xcopy d: c: /e /h /k

• Now, to make your C: drive bootable, type the command below and hit Enter after each line:

bootsect /nt60 c: 
bootsect /nt60 c: /mbr

• Eject the USB drive from your computer, and restart.
• Boot back into Windows setup and select Install Now.

The installation should proceed without any errors.

Hope this helps!

Related posts

• Dejinta Daaqadaha ayaa u habeyn kari waayay Windows inay ku shaqeyso qalabka kombayutarada

• Hagaaji qaladaadka OOBEKEYBOARD, OOBELOCAL, OOBEREGION

• Waxbaa khaldamay, OBESETTINGS intii lagu jiray dejinta Daaqadaha

• Asalka DirectX Dejinta Khaladka: Khalad gudaha ah ayaa dhacay

• Maanu samayn kari waynay qayb cusub - Windows 10 qalad rakibaadda

• Cilada adeegga ciyaaraha 0x80073D26, 0x8007139F ama 0x00000001

• Sida loo xaliyo dhibaatada isku dhaca Saxeexa Disk ee gudaha Windows 11/10

• Hagaaji Code Error Code 30038-28 marka la cusboonaysiinayo Xafiiska

• Madax adag ayaa heshay fariin khaldan oo xog xun Windows 10

• Hagaaji qaladka Codsiga 0xc0150004 gudaha Windows 11/10

• Kumbuyuutarkan looma cusboonaysiin karo Windows 10 sababtoo ah Goobaha Kaydinta Lammaaniga ah

• SFC way ku guuldareysatay inay dayactirto iyo DISM waxay tusinaysaa qaladka 0x800f081f gudaha Windows 10

• Hagaaji Qaladka Load Application 5:0000065434 Windows 10

• Hagaaji koodka qaladka Dejinta Windows 0x80070006

• Habkani waxa uu u baahan yahay warbaahin meesha laga saari karo - Qaladka dib u dejinta erayga sirta ah

• Aqoonsiga Dhacdada 158 qalad - Diskiga isku midka ah ee GUIDs ee ku jira Windows 10

• Daaqadaha ma xaqiijin karaan saxiixa dhijitaalka ah (Koodhka 52)

• Barnaamijku ma bilaaban karo sababtoo ah AppVIsvSubsystems32.dll ayaa maqan

• Ku rakib Realtek HD Audio Driver Failure, Cilad OxC0000374 Windows 10

• Fadlan geli warbaahinta kaydinta dibadda oo tabo OK