Maqaalka maanta, waxaan isku dayi doonaa inaan ku tusino sida loo xalliyo arrinta Goobta BIOS hadda si buuxda uma taageerto qalabka boot-^{(The current BIOS setting do not fully support the boot device)} ka ee laga yaabo inaad la kulanto Windows 10 kombiyuutarkaaga.

Goobta BIOS hadda si buuxda uma taageerto qalabka boot-ka

Haddii aad la kulanto arrintan, waxaanu kuu soo jeedinaynaa inaad isku daydo xalalkan sinaba u kala horreeyaan:

1. U eeg HDD-gaaga jir ahaan
2. Samee Dayactirka Bilawga
3. Hubi dalabka qalabka boot
4. Dib u habayn dejinta BIOS.

Haddaba, aynu si faahfaahsan u eegno cilad-raadinta liistada ah.

1] U eeg HDD-gaaga jir ahaan

Xalkani wuxuu u baahan yahay inaad furto kombiyuutarka oo aad ka saarto oo aad dib u xirto qalabka gudaha ku jira. Sii wad^(Proceed) kaliya haddii aad taqaano waxaad samaynayso ama u kaxayso kumbiyuutarka farsamayaqaanka qalabka si uu u sameeyo nidaamka.

Haddii kani yahay dhisme cusub ama mid cusub, ka hubi HDD arrimaha xidhiidhka. Fur kombiyuutarka oo ka saar fiilada SATA ee ^(SATA)HDD iyo Motherboard-ka. Sidoo kale, ka saar dhammaan tamarta HDD oo ka tag qaybaha hawl-la'aan dhowr daqiiqo. Hadda ku xidh dhammaan fiilooyinka oo ku xidh darawalka adag ee hooyadaada. Kumbuyuutarka kax oo arag haddii arrinta la xaliyay.

Haddii taasi shaqayn waydo, isku day inaad ku xidho HDD^(HDD) -ga deked kale oo SATA ah oo ku taal MOBO si aad u aragto inay taasi caawinayso.

2] Samee Dayactirka Bilawga

Samee kuwan soo socda:

• Geli Windows 10 installation DVD/USB oo dib u bilow kombayutarkaga.
• Ka dib markaad kumbuyuutarka ku dhejiso adigoo isticmaalaya Windows DVD/USB ama System Repair Disc , waxaa soo baxaysa shaashad madow oo leh qoraal cawl ah " Riix^(Press) furaha kasta si aad CD ama DVD-ga uga bootsato". Riix^(Press) furaha kasta.
• Dooro wakhtiga saxda ah iyo nooca Kiiboodhka^(Keyboard) .
• Guji  Dayactir kumbiyuutarkaaga ^{(Repair your computer )} dhanka bidix ee hoose.
• Ka dooro cilad ^{(Troubleshoot )} -bixinta ka dooro shaashada ikhtiyaarka ah.
• Guji  ikhtiyaarada sare ^{(Advanced options )} ee shaashadda cilad-bixinta.
• Guji Automatic/Startup Repair.

Daaqadaha ayaa markaa ka raadi doona mashaakilaadka dariiqyada adag waxayna xaqiijin doonaan in dhammaan faylalka loo baahan yahay ay sax yihiin.

3] Hubi mudnaanta qalabka boot

• Bilow kombayutarka oo taabo ESC/F1/F2/F8  ama F10 inta lagu jiro shaashadda bilowga ah si aad u gasho shaashadda BIOS Setup
• Dooro Geli ikhtiyaarka dejinta BIOS.
• Maadaama mouse-ku aanu shaqayn, isticmaal furayaasha fallaadha si aad u dhex marato.
• Tag   tabka Bootka .^(Boot)
• Hadda hubi dalabka qalabka boot^{(check the boot device order)} . Hubi in HDD -gaaga loo doortay aaladda mudnaanta leh.
• Ka bax oo dib u bilow kombayutarka.

Hubi haddii qaladka la xaliyay. Haddii kale, sii wad xalka xiga.

4] Dib u habeynta goobaha BIOS

Si aad dib u dejiso goobaha BIOS , samee waxyaabaha soo socda:

• Dib u bilow kombayutarka oo si isdaba joog ah u taabo  ESC/F1/F2/F8  ama  F10  inta lagu guda jiro bilowga si aad u gasho BIOS .
• Haddii aad isticmaalayso Windows 10 , guji  Start  oo dooro  Power.
• Hadda taabo oo hay  furaha Shift  oo taabo  Dib u bilow.^(Restart.)
• Tag  Troubleshoot > Advanced Options > UEFI Firmware Settings  oo dhagsii  Dib u bilow.^(Restart.)
• Marka aad ku jirto BIOS, taabo  F9  si aad u furto  Load Default Options  sanduuqa wada hadalka.
• Dooro  Haa^(Yes)  adiga oo isticmaalaya furayaasha fallaadha si aad dib ugu dejiso jaangooyooyinka BIOS^(BIOS) si ay u noqdaan kuwo saxan.
• Ka bax oo dib u bilow kombayutarka.

Bootka, hubi si aad u aragto in qaladka BIOS la xaliyay.

Taasi waa waxa kaliya ee jira in si guul leh loo xalliyo arrinta.^{(That’s all there’s to successfully resolving the issue.)}

The current BIOS setting do not fully support the boot device

In today’s post, we will attempt to show you how to resolve the issue The current BIOS setting do not fully support the boot device that you might encounter on your Windows 10 computer.

The current BIOS setting do not fully support the boot device

If you’re experiencing this issue, we suggest you try these solutions in no particular order:

1. Check your HDD physically
2. Perform Startup Repair
3. Check boot device order
4. Reset BIOS settings.

Now, let’s take a detailed look at the listed troubleshooting.

1] Check your HDD physically

This solution requires you to open the computer and disconnect and reconnect the hardware inside. Proceed only if you know what you are doing or take the computer to a hardware technician to perform the procedure.

If this is a new or relatively new build, check the HDD for connection issues. Open the computer and disconnect the SATA cable from the HDD and motherboard. Also, disconnect all the power from the HDD and leave the components idle for a few minutes. Now plug all the cables and connect the hard drive to your motherboard. Boot the computer and see if the issue is resolved.

If that does not work, try plugin the HDD to a different SATA port on the MOBO to see if that helps.

2] Perform Startup Repair

Do the following:

• Insert the Windows 10 installation DVD/USB and restart your computer.
• After you boot your computer using Windows DVD/USB or System Repair Disc, a black screen appears with gray text “Press any key to boot from CD or DVD”. Press any key.
• Select the correct time and Keyboard type.
• Click Repair your computer in the lower-left corner.
• Select Troubleshoot from Choose an option screen.
• Click Advanced options in Troubleshoot screen.
• Click Automatic/Startup Repair.

Windows will then look for problems on the hard drive(s) and verify that all required files are intact.

3] Check boot device priority

• Start the computer and press ESC/F1/F2/F8 or F10 during the initial startup screen to enter the BIOS Setup screen
• Choose Enter BIOS setup option.
• Since the mouse does not work, use the arrow keys to navigate.
• Go to the Boot tab.
• Now check the boot device order. Make sure your HDD is selected as the priority device.
• Exit and restart the computer.

Check if the error is resolved. If not, proceed with the next solution.

4] Reset BIOS settings

To reset the BIOS settings, do the following:

• Restart your computer and repeatedly press ESC/F1/F2/F8 or F10 during the startup to get into BIOS.
• If you are using Windows 10, click on Start and select Power.
• Now press and hold the Shift key and press Restart.
• Go to Troubleshoot > Advanced Options > UEFI Firmware Settings and click on Restart.
• Once you are in BIOS, press F9 to open the Load Default Options dialogue box.
• Select Yes using the arrow keys to reset BIOS settings to factory default.
• Exit and restart the computer.

On boot, check to see if the BIOS error is resolved.

That’s all there’s to successfully resolving the issue.

Related posts

• Beddelka taariikhda kalandarka ee BIOS ma shaqaynayso

• Sida loo cusboonaysiiyo BIOS ee kumbiyuutarka Windows 11/10

• Waa maxay liiska cad ee BIOS? Sharaxaada iyo ka saarida.

• Khaladaadka la galay

• Waa maxay CMOS maxaase loo isticmaalaa?

• Sida loo geliyo Windows UEFI ama BIOS firmware

• Sida loo dejiyo oo loo isticmaalo BIOS ama UEFI erayga sirta ah ee kumbuyuutarka Windows 10

• Sidee loo dami karaa BIOS Cache ama Shadowing?

• Sida loo galo BIOS gudaha Windows 10

• Sida Loo Helo BIOS Version on Computer

• Waa maxay BIOS? Waa maxay macnaha BIOS?

• 6 siyaabood oo lagu galo BIOS gudaha Windows 10 (Dell/Asus/HP)

• Hagaha ugu dambeeya ee ka saarida ama dib-u-dejinta erayga sirta ah ee BIOS

• Nidaamka kombiyuutarkaaga kuma jiraan macluumaad ku filan

• Sida loo galo loona isticmaalo BIOS gudaha VMware Workstation

• Sida dib loogu dejiyo ama loo nadiifiyo CMOS Windows 11/10 PC

• Cilada Cusboonaysiinta Dell BIOS - Dejinta amnigaaga lama ogaan karo

• Waa maxay UEFI ama Interface Firmware Midaysan?

• Jidadka gaaban ee UEFI BIOS & Windows 10 ee Deegaanka Soo kabashada

• Sida loo hubiyo nooca BIOS ee Windows (8 siyaabo)