Haddii aad haysatid faylka .BAT oo aad isku dayayso in aad si toos ah u socodsiiso adiga oo isticmaalaya Jadwalka Hawsha^{(Task Scheduler)} ee Windows , waxa laga yaabaa in aad arrinta ku dhex martay halkaas oo aanu si fudud u socon ilaa aad gacanta ku qabato hawsha.

Waxaan sameeyay fayl dufcad ah oo tirtira wax kasta oo ku jira gal-ku-meel-gaadhka mar kasta oo kombuyuutarku bilaabo. Waxaan ku abuuray hawl asaasi ah Jadwalka Hawsha^{(Task Scheduler)} waxaanan rajaynayaa sida ugu wanaagsan. Nasiib darro, waxba ma dhicin markii kombuyutarkaygu kor u kacay. Tijaabooyin badan iyo khaladaad ka dib, waxaan ogaaday sida loo helo qoraalka.

Maqaalkan, waxaan kugu socon doonaa habaynta iyo oggolaanshaha aad u baahan tahay inaad la qabsato si aad u hesho faylkaaga dufcadda inuu shaqeeyo iyada oo aan faragelin gacanta lagu samayn.

Tallaabada 1: Hubi File/Folder Ogolaanshaha

Tallaabada ugu horreysa ee lagu xallinayo arrintan waa in la hubiyo in koontada aad isticmaalayso si aad u socodsiiso qoraalka ku jira Jadwalka Hawsha^{(Task Scheduler)} uu haysto oggolaansho Kontorool oo Buuxa^{(Full Control)} galka ka kooban qoraalka, qoraalka laftiisa, iyo faylal kasta/faylal kasta oo qoraalku taabto marka uu socdo.

Tusaale ahaan, waxaan sameeyay qoraalka dufcadda soo socda ee hoose:

set folder="C:\test"
cd /d %folder%
for /F "delims=" %%i in ('dir /b') do (rmdir "%%i" /s/q || del "%%i" /s/q)

Waxaan ku kaydiyay faylka .BAT galkayga Documents. ^(.BAT)Waddadu waa C:\Users\username\Documents . Waxaan tagay C: \ Users \ username, midig-guji galka Documents , oo guji Properties . Kadibna waxaan taabtay Security tab.

Sida aad arki karto, koontada isticmaale ee Aseem ayaa si toos ah loogu daray waxaana la siiyay ogolaanshaha Full Control.Â^{(Full Control)} Hadda waa inaad sidaas oo kale u sameysaa faylka uu ka kooban yahay qoraalka iyo qoraalka laftiisa. Kaliya ha u qaadan in haddii aad fasax siiso galka qoraalku ku jiro, waad fiicantahay inaad tagto, sababtoo ah ma tihid. Ugu dambayntii, deji ogolaanshaha fayl kasta iyo faylal kasta oo qoraalku la falgeli doono.

Xaaladeyda, waa inaan aado C:\test , midig-guji galkaas oo aan ku daro koontada isticmaalaha halkaas oo leh ogolaanshaha Xakamaynta buuxda . ^{(Full Control)}Waa nooc ka cadhaysiinaya inaad tan sameyso, laakiin waa habka kaliya ee aad ku heli karto qoraalka.

Xusuusin: Koontada loo isticmaalay in lagu socodsiiyo qoraalka waa in ay ka mid noqotaa kooxda maamulayaasha deegaanka ee kumbuyuutarka. Xaaladeyda, koontada Aseem waa xisaab maamul sidaas darteedna waa qayb ka mid ah kooxda maamulayaasha maxalliga ah. ^{(Note: The account that is being used to run the script has to be part of the local Administrators group on the computer. In my case, the Aseem account is an administrator account and therefore part of the local Administrators group. )}

Talaabada 2: Hubi Settings Jadwalka Hawsha^{(Task Scheduler Settings)}

Hadda aan aadno Jadwalka Hawsha^{(Task Scheduler)} oo aan beddelno goobaha ku habboon. Fur Jadwalka Hawsha^{(Task Scheduler)} oo ka hel hawshaada hoosteeda qaybta Hawlaha Firfircoon^{( Active Tasks)} . Waa in loo taxaabay hab alifbeeto ah.

Laba jeer ku dhufo oo waxay ku furi doontaa hawsha lafteeda isla daaqada. Si aad hawsha wax uga beddesho, waa inaad midigta ku dhufataa oo doorataa Guryaha^(Properties) .

Waxa jira dhawr tab iyo laba shay oo ay tahay in la hubiyo oo la beddelo halkan. Marka hore, tabka Guud^(General) , waxaad u baahan tahay inaad hubiso akoonka isticmaalaha ee loo adeegsanayo socodsiinta hawsha. Xaaladeyda , waa akoonka Aseem , kaas oo aan hore u siiyay ogolaanshaha nidaamka faylalka oo ka mid ah kooxda maamulayaasha^{(Administrators)} kombiyuutarka.

Marka xigta, waa inaad dooratid Run haddii isticmaaluhu uu ku jiro ama aan la^{( Run whether user is logged on or not)} dooran oo dooro Windows Vista, Windows Server 2008 ee ku dheji^{(Configure for)} sanduuqa.

Xagga Actions tab, waa inaad doorataa qoraalka, dhagsii Edit ka dibna ku dar dariiqa galka ay ku jiraan qoraalka ku yaal th e Start in (optional) sanduuqa. Tani waxay u muuqan kartaa mid aan loo baahnayn, laakiin maaha. Kiiskeyga, waxaan galiyay C:\Users\Aseem\Documents\ sanduuqa dhexdiisa.

Hadda dhagsii OK si aad u kaydiso Settings. Markaad tan sameyso, wada hadal ayaa kuu muuqan kara meesha aad geliso erayga sirta ah ee koontada isticmaale ee socodsiin doonta hawsha. Tani waxay keenaysaa shuruud kale. Ma isticmaali kartid akoon aan lahayn furaha sirta ah. Koontada isticmaaluhu waa inay lahaataa furaha sirta ah si ay hawshu u socoto.

Ugu dambayntii, waa inaad hawsha si gacanta ah ku socodsiisaa hal mar Jadwalka Hawsha^{(Task Scheduler)} si aad u hubiso inay socoto. Haddii ay si fiican u socoto ka dib markaad bedesho dhammaan goobaha, markaa waa inay socotaa marka ay tahay in la kiciyo. Xaaladeyda, waxay ahayd inay dhacdo bilawga iyo ka dib markii aan isbeddelay, wax walba si fiican ayey u shaqeeyeen.

Ogsoonow in haddii qoraalkaagu uu galo kombiyuutaro kala duwan oo ku jira domain marka uu socdo, waa inaad isku daydaa inaad isticmaasho xisaabaadka maamulka domain si aad u socodsiiso hawsha. Tani waxay hubin doontaa in akoonku leeyahay ogolaansho ku filan si uu u galo kombiyuutarada fogfog.

Shayga kale ee la xuso waa haddii qoraalkaagu galo ilaha wadaagga shabakada. Haddii qoraalkaagu u isticmaalayo xarfo si uu u galo shabakada, waxa laga yaabaa in aanu shaqayn. Tusaale ahaan, intii aad isticmaali lahayd F:\data\ , waa inaad ku isticmaashaa \\machinename\share_name\data\ Â script. Haddii aadan weli awoodin in qoraalkaaga uu shaqeeyo, faallo ku dheji halkan waxaanan isku dayi doonaa inaan ku caawiyo. Ku raaxayso!

Fix Scheduled Task Won’t Run for .BAT File

If you have a .BAT file and yoυ’re trying to get it to run automatically using Task Scheduler in Windows, you might have run into the issue whеre it simply doesn’t run unless you manually run thе task.

I created a batch file that deletes everything inside a temp folder whenever the computer starts up. I created a basic task in Task Scheduler and hoped for the best. Unfortunately, nothing happened when my computer booted up. After a lot of trial and error, I figured out how to get the script to run.

In this article, I’m going to walk you through the settings and permissions you need to adjust in order to get your batch file to run without manual intervention.

Step 1: Check File/Folder Permissions

The first step to fixing this issue is ensuring that the account you are using to run the script in Task Scheduler has Full Control permissions on the folder containing the script, the script itself, and any folders/files that the script touches when it runs.

For example, I created the following batch script below:

set folder="C:\test"
cd /d %folder%
for /F "delims=" %%i in ('dir /b') do (rmdir "%%i" /s/q || del "%%i" /s/q)

I saved the .BAT file to my Documents folder. The path is C:\Users\username\Documents. I went to C:\Users\username, right-clicked on the Documents folder, and clicked on Properties. Then I clicked on the Security tab.

As you can see, the user account Aseem has been explicitly added and given the Full Control permission.  Now you have to do the same thing for the folder that contains the script and for the script itself. Don’t just assume that if you give permissions to the folder containing the script, you’re good to go, because you’re not. Lastly, set permissions on any files and folders that the script will interact with.

In my case, I had to go to C:\test, right-click on that folder and add my user account there with Full Control permissions. It’s kind of annoying that you have to do this, but it’s the only way to get the script to run.

Note: The account that is being used to run the script has to be part of the local Administrators group on the computer. In my case, the Aseem account is an administrator account and therefore part of the local Administrators group. 

Step 2: Check Task Scheduler Settings

Now let’s go to Task Scheduler and change the appropriate settings there. Open Task Scheduler and find your task under the Active Tasks section. They should be listed out in alphabetical order.

Double-click on it and it’ll open the task by itself in the same window. In order to edit the task, you’ll have to right-click on it and choose Properties.

There are several tabs and a couple of things have to checked and changed here. Firstly, on the General tab, you need to check the user account that is being used to run the task. In my case, it’s the Aseem account, which I had given permissions to earlier on the file system and which is part of the Administrators group on the computer.

Next, you have to choose the Run whether user is logged on or not option and choose Windows Vista, Windows Server 2008 in the Configure for box.

On the Actions tab, you have to select the script, click on Edit and then add in the path to the folder containing the script in the Start in (optional) box. This may seem unnecessary, but it’s not. In my case, I put in C:\Users\Aseem\Documents\ in the box.

Now click on OK to save the settings. When you do this, a dialog may appear where you have to enter the password for the user account that will run the task. This brings up another requirement. You can’t use an account that doesn’t have a password. The user account has to have a password in order for the task to run.

Lastly, you should run the task manually once in Task Scheduler to make sure it runs. If it runs fine manually after you changed all the settings, then it should run when it’s supposed to be triggered. In my case, it was supposed to happen on startup and after I made the changes, everything worked fine.

Note that if your script is accessing different computers in a domain when run, you should try to use the domain administrator account to run the task. This will ensure the account has enough permissions to access the remote computers.

Another item to note is if your script accesses resources on a network share. If your script is using letters to access the network, it may not run. For example, instead of using F:\data\, you should use \\machinename\share_name\data\ in the script. If you still can’t get your script to run, post a comment here and I’ll try to help. Enjoy!

Related posts

• Hagaaji "Kama Akhrin Karo Isha File ama Disk" Khaladka

• Sida loo hagaajiyo 'Aan ku Filan Kheyraadka Xakamaynta USB' ee Windows 10

• Sida loo hagaajiyo "Ma buuxin kari waynay Cusbooneysiinta" Cilad ku jirta Windows

• Sida loo hagaajiyo "Spotify ma ciyaari karo kan hadda" qalad

• Sida loo hagaajiyo Discord's "Rote No" qalad

• Dekedaha USB 3.0 ma shaqeeyaan? Waa kan sida loo hagaajiyo

• Sida loo hagaajiyo "Dhibaato ayaa ka jirtay Baarista Xidhmada" ee Android

• Sida Loo Hagaajiyo Amazon Dabka Tablet Aan Dalacin

• Sida Loo Hagaajiyo "Dhibaato Ka Jirta Shatiga Xafiiskaga"

• Fix "Qalabka shabakadda wireless-ka ee aan la taageerin waa la helay. Nidaamkii waa la joojiyay" Khaladka

• FIX: Laabtoobku kuma xidhmi doono Wi-Fi

• Hagaaji "Daaqadaha si toos ah uma ogaan karaan Shabakadda Proxy Settings" cilad

• Qalabka Windows 7 iyo Madbacadaha ayaa laalaada ama ma furayaan?

• Sida loo Hagaajiyo Gacsiga Khaladaadka Khibrada Khibrada 0x0003

• Sida loo hagaajiyo "dns_probe_started" gudaha Google Chrome

• Hagaaji "Qalabkani ma isticmaali karo Module Platform la Aaminsanyahay" Marka la sahlayo BitLocker

• Sida loo hagaajiyo Hotspot-ka oo aan ku shaqayn Android

• Sida loo hagaajiyo Err_Too_Many_Redirects gudaha Google Chrome

• Sida Qoraalka Looga Koobi Karo File PDF

• Sida loo hagaajiyo 'RPC Server waa lama heli karo' qalad gudaha Windows