Hagaaji Computerku wuu dami marka aaladda USB lagu xidho: ^{(Fix Computer shuts down when USB device is plugged in: )} Haddii aad PC xidhid si aan kala sooc lahayn marka aaladda USB lagu xidho, waxaad joogtaa meesha saxda ah maanta waxaan ka hadli doonaa sida loo xaliyo arrintan. Xaaladaha qaarkood, kumbuyuutarku wuu xidhaa ama dib ayuu u bilaabmaa mar kasta oo isticmaaluhu ku xidho aaladda USB , markaa runtii waxay kuxirantahay habaynta nidaamka isticmaale. Imika wax war ah lagama hayo xogtaas oo ay adagtahay in halkan lagu soo gebagebeeyo wax kasta oo keenaya markaa waxa aynu xalin doonaa arimo kala duwan oo dhibaatadan la xidhiidha.

Inkastoo aysan jirin macluumaad badan oo la heli karo waxaa jira sababo dhowr ah oo la garanayo sida haddii qalabka USB uu u baahan yahay awood ka weyn waxa PSU ay ku siin karto qalabkaas markaa nidaamku wuu dhammaan doonaa kheyraadka wuxuuna xiri doonaa ama dami doonaa kombiyuutarkaaga si loo hagaajiyo si looga hortago burburka nidaamka. Arrin kale ayaa ah haddii ay jirto dhibaato hardware la xiriirta qalabka USB ama haddii ay leedahay gaaban markaas nidaamku hubaal wuu xirmi doonaa. Mararka qaarkood dhibaatadu waxay la xiriirtaa oo keliya dekedda USB markaa iska hubi inaad hubiso qalab kale oo USB ah si loo xaqiijiyo in arrintu la xiriirto iyo in kale.

Hadda oo aad wax ka ogaatay arrimaha iyo sababaha kala duwan, waa waqtigii la arki lahaa sida loo xalliyo arrinta. Markaa annagoon wax wakhti lumin aan aragno sida dhabta ah ee loo hagaajiyo kombuyuutarku marka aaladda ^{(Fix Computer)}USB lagu xidho arrinka iyadoo la kaashanayo hagaha cilad-bixinta ee hoos ku qoran.

Hagaaji Kumbuyuutarku^{(Fix Computer)} wuu dami marka aaladda USB lagu xidho

Hubi inaad  abuurto barta soo celinta^{(create a restore point)}  haddii ay wax qaldamaan.

Habka 1: Dib u rakib darawalada USB^{(Method 1: Reinstall USB Drivers)}

1. Riix Windows Key + R kadibna ku qor devmgmt.msc oo ku dhufo Enter si aad u furto Maamulaha Qalabka^{(Device Manager)} .

2.Balaadhi Universal Serial Bus controllers ka dibna midig-guji mid kasta oo ka mid ah aaladaha liiska oo dooro Uninstall.

3.Hadda guji View ka dibna dooro Show qarsoon.^{(Show hidden devices.)}

4.Again balaadhi Universal Serial Bus controllers ka dibna uninstall mid kasta oo ka mid ah qalabka qarsoon.

5.Similarly, balaadhi kaydinta mugga^{(Storage volumes)} iyo uninstall mid kasta oo ka mid ah qalabka qarsoon.

6. Dib u bilow kombayutarkaga oo nidaamkaagu si toos ah ayuu u rakibi doonaa darawalada USB-ga^(USB) .

Habka 2: Orod USB Troubleshooter^{(Method 2: Run USB Troubleshooter)}

1. Fur biraawsarkaaga oo geli URL- kan soo socda (ama guji xiriirka hoose):

https://support.microsoft.com/en-in/help/17614/automatically-diagnose-and-fix-windows-usb-problems

2.Marka uu boggu dhammeeyo dejinta, hoos u dhaadhac oo guji Download.

3.Marka faylka la soo dejiyo,laba-guji faylka si aad u furto cilladaha Windows USB.^{(Windows USB troubleshooter.)}

4. Guji xigta oo u daa Windows USB Troubleshooter inuu shaqeeyo.

5. HADDII aad leedahay wax qalab ah oo ku lifaaqan markaas USB Troubleshooter ayaa ku weydiin doona xaqiijin si aad u saarto.

6. Hubi qalabka USB-ga^(USB) ee ku xiran PC-gaaga kadibna dhagsii Next .

7.Haddii dhibka la helo, guji Codso hagaajintan.^{(Apply this fix.)}

8.Dib u bilow kombayutarkaga oo arag hadii aad awood u yeelan karto in aad hagaajiso kombuyuutarku marka uu xidhmo  USB-ga.^{(Fix Computer shuts down when USB device is plugged in issue.)}

Habka 3: Run System Restore^{(Method 3: Run System Restore)}

1.Riix Windows Key + R oo ku qor" sysdm.cpl "kabacdi ku dhufo gal.

2.Select System Protection tab oo dooro System Restore.

3.Riix Next oo dooro meesha aad rabto System Soo celinta^{(System Restore point)} .

4.Raac tilmaamaha shaashadda si aad u dhammaystirto soo celinta nidaamka.

5.After reboot, waxaa laga yaabaa in aad awoodo in aad hagaajiso Computer dami marka qalabka USB lagu xidho.^{(Fix Computer shuts down when USB device is plugged in.)}

Habka 4: Hubi Aaladaha ku xiran^{(Method 4: Check Connected Devices)}

Haddii aaladaha USB-ga^(USB) ee ku xiran ay cunaan awood aad u badan markaas waxay sidoo kale keeni kartaa shil nidaamka. Si loo xaqiijiyo in qalabku uu khaldan yahay iyo in kale, iska hubi inaad ku xidhid qalabka PC kale. Haddii qalabku aanu shaqayn markaa qalabku hubaal waa cilad.

Habka 5: Dekici dekedaha USB^{(Method 5: Disable USB Ports)}

1. Riix Windows Key + R kadibna ku qor devmgmt.msc oo ku dhufo Enter.

2.Expand Universal Serial Bus controllers ka dib midigta ku dhufo darawalada USB^{( USB drivers)} ka dooro Disable.

3.Markale midig-guji oo dooro Enable.

3.Reboot your PC si aad u badbaadiso isbedelada oo aad aragto haddii aad awood u leedahay inaad  hagaajiso kumbiyuutarka marka qalabka USB lagu xiro.^{(Fix Computer shuts down when USB device is plugged in.)}

Habka 6: Beddel Qaybta Korontada (PSU)^{(Method 6: Change Power Supply Unit (PSU))}

Hagaag, haddii aysan waxba ku caawin markaas waxaad hubin kartaa in arintu ay tahay PSU -gaaga . Si arrinta loo xalliyo, waxaad u baahan tahay inaad beddesho unugga korantada ee kombiyuutarkaaga. Waxaa lagugula talinayaa inaad tixgeliso caawinta farsamoyaqaanka saxda ah si aad u bedesho qaybtaada PSU .

Lagugula talinayaa adiga:^{(Recommended for you:)}

• Fix Windows way ka bilaabi kari wayday adeegga Daabacaadda Spooler kombuyuutarka maxaliga ah^{(Fix Windows could not start the Print Spooler service on local computer)}
• Hagaaji PAGE_FAULT_IN_NONPAGED_AREA Khaladka^{(Fix PAGE_FAULT_IN_NONPAGED_AREA Error)}
• Sida loo Hagaajiyo KERNEL_DATA_INPAGE_ERROR^{(How To Fix KERNEL_DATA_INPAGE_ERROR)}
• Hagaaji CITICAL_STRUCTURE_CORRUPTION Khaladka^{(Fix CRITICAL_STRUCTURE_CORRUPTION Error)}

Taasi waa waxa aad si guul leh u hagaajisay kombuyuutarku xidhmayo marka qalabka USB lagu xidho^{(Fix Computer shuts down when USB device is plugged in)} laakiin haddii aad wali wax su'aal ah ka qabto qoraalkan xor u noqo inaad ku waydiiso qaybta faallooyinka.

Fix Computer shuts down when USB device is plugged in

Fix Computer shuts down when USB device is plugged in: If you PC shutdowns randomly when a USB device is connected then you are at the right place as today we are going to discuss on how to fix this issue. In some cases, computer shut down or restarts whenever the user plug in a USB device, so it really depends on user system configuration. Now there is no information about this information and it’s difficult to conclude any cause from here so we are going to troubleshoot various issues which are related to this problem.

Although there isn’t much information available there are quite a few known cause such as if the USB device requires power greater than what the PSU can supply to that device then the system will run out resources and lock up or power off your computer in order to prevent system damage. Another issue is if there is a hardware related problem in the USB device or if it has a short then the system will definitely shut down. Sometimes the problem is only related to USB port so make sure to check another USB device in order to verify if the issue is related to it or not.

Now that you have known about the issues and various causes it’s time to see how to resolve the issue. So without wasting any time let’s see how to actually Fix Computer shuts down when USB device is plugged in issue with the help of below-listed troubleshooting guide.

Fix Computer shuts down when USB device is plugged in

Make sure to create a restore point just in case something goes wrong.

Method 1: Reinstall USB Drivers

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2.Expand Universal Serial Bus controllers then right-click on each of the listed devices and select Uninstall.

3.Now click on View then select Show hidden devices.

4.Again expand Universal Serial Bus controllers and then uninstall each of the hidden devices.

5.Similarly, expand Storage volumes and uninstall each of the hidden devices.

6.Restart your PC and your system will automatically install the USB drivers.

Method 2: Run USB Troubleshooter

1.Open your web browser and enter the following URL (or click on the below link):

https://support.microsoft.com/en-in/help/17614/automatically-diagnose-and-fix-windows-usb-problems

2.When the page has finished loading, scroll down and click Download.

3.Once the file is downloaded, double-click the file to open the Windows USB troubleshooter.

4.Click next and let Windows USB Troubleshooter run.

5.IF you have any attached devices then USB Troubleshooter will ask for confirmation to eject them.

6.Check the USB device connected to your PC and click Next.

7.If the problem is found, click on Apply this fix.

8.Restart your PC and see if you’re able  to Fix Computer shuts down when USB device is plugged in issue.

Method 3: Run System Restore

1.Press Windows Key + R and type”sysdm.cpl” then hit enter.

2.Select System Protection tab and choose System Restore.

3.Click Next and choose the desired System Restore point.

4.Follow the on-screen instruction to complete system restore.

5.After reboot, you may be able to Fix Computer shuts down when USB device is plugged in.

Method 4: Check Connected Devices

If the connected USB devices consume too much power then it may also lead to system crash. In order to verify if the device is faulty or not, make sure to connect the device to another PC. If the device doesn’t work then the device is definitely faulty.

Method 5: Disable USB Ports

1.Press Windows Key + R then type devmgmt.msc and hit Enter.

2.Expand Universal Serial Bus controllers then right click on USB drivers and select Disable.

3.Again right-click on it and select Enable.

3.Reboot your PC to save changes and see if you’re able to Fix Computer shuts down when USB device is plugged in.

Method 6: Change Power Supply Unit (PSU)

Well, if nothing helps then you can be sure that the issue is with your PSU. In order to fix the issue, you need to change your computer power supply unit. It’s advised you consider the help of a proper technician in order to replace your PSU unit.

Recommended for you:

• Fix Windows could not start the Print Spooler service on local computer
• Fix PAGE_FAULT_IN_NONPAGED_AREA Error
• How To Fix KERNEL_DATA_INPAGE_ERROR
• Fix CRITICAL_STRUCTURE_CORRUPTION Error

That’s it you have successfully Fix Computer shuts down when USB device is plugged in but if you still have any question regarding this post feel free to ask them in the comment’s section.

Related posts

• Hagaaji Kumbuyuutarku ma bilaabo ilaa dib loo bilaabo dhawr jeer

• Hagaaji kumbuyuutarka oo aan aqoonsanayn iPhone

• Sida loo hagaajiyo Kumbuyuutarku si toos ah ayuu u dami doonaa

• Ku hagaaji shilalka kumbuyuutarka ee Qaabka Badbaadada ah

• Hagaaji USB wuxuu sii wadaa goynta iyo dib u xidhida

• Hagaaji DLL Aan Laga Helin Ama Ka Maqan Kombayutarka Daaqadaha

• Hagaajin Windows kuma xidhiidhi karto qalabka ama kheyraadka

• Hagaaji Kumbuyuutarku Dib Uma Soo Laabin Sababta Oo Ah Xog Wakhti Ah Oo La Heli La'yahay

• Hagaaji USB Code Error Code 39

• Hagaaji Isticmaalka Sare ee CPU ee Adeeg bixiyaha: Nidaamka Maxalliga ah

• Hagaaji Windows 10 kama soo bixi doono USB [XALIYAY]

• Hagaaji Aaladda Isku-dhafka ah ee USB si sax ah uguma shaqeyn karto USB 3.0

• [FIXED] USB Drive-ka oo aan muujinayn faylal iyo galal

• Hagaaji isku xidhka USB-ga oo aan shaqaynayn Windows 10

• Hagaaji qalabka USB-ga ee uusan aqoonsanayn Windows 10

• Hagaaji Waxaa jira dhibaato ka jirta shahaadada amniga ee shabakadan

• Hagaaji Aan La Furi Karin Disk-ga Maxalliga ah (C :)

• Sida loo Hagaajiyo Dhibaatooyinka Muujinta Kormeeraha Kumbuyuutarka

• Sida loo hagaajiyo PC-ga ma soo dhejin doonto

• Hagaaji Codsiga Sharaxiyaha Qalabka (Aaladda USB Aan La Aqoon)