Haddi kombayutarkaga ama kombayutarkaagu uu ku guuldaraysto in uu bootiyo oo uu tuuro khaladka; PXE-E61: Tijaabada warbaahinta oo fashilantay, hubi fiilada^{(PXE-E61: Media test failure, check cable)} AMA PXE-M0F: Ka bixida PXE ROM^{(PXE-M0F: Exiting PXE ROM )} ee muraayad madow, ka dib boostadan waxaa loogu talagalay inay ku caawiso. Maqaalkan, waxaan ku aqoonsan doonaa sababaha suurtagalka ah ee qaladka, iyo sidoo kale bixinta xalalka ugu habboon ee aad isku dayi karto inaad si guul leh u xalliso arrinta.

PXE-E61 , Tijaabada warbaahinta^(Media) oo fashilantay, hubi fiilada

Khaladku waxa uu tilmaamayaa mushkiladda PXE -ga kombayutarkaga . Inta badan, qaladkani wuxuu yimaadaa marka nidaamka bootkaagu si khaldan loogu habeeyo  BIOS -kaaga , ama qalabkaaga boot-ka ah (sida caadiga ah dariiqaaga adag) si sax ah looma akhriyi karo sababtoo ah jir ahaan wuu dhaawacmay, musuqmaasuqay, ama shil.

Sababaha kale ee qaladkan waxaa ka mid ah:

• Arrinta awoodda
• Fiilada ethernet-ka oo burburay
• Hard Drive ama network drive waa
• Qaybta kabaha oo burburay

Marka lagu daro labada fariinta khaladka ah ee diirada lagu saaray boostadan, kuwa soo socda waa khaladaadka la xidhiidha PXE-E61 :

PXE-M0F: Exiting Intel PXE ROM.

PXE-M0F: Exiting Intel Boot Agent.

No Boot Device Found. Press any key to reboot the machine.

PXE-M0F: Ka bixida PXE ROM

Haddii aad la kulanto arrintan, waxaad isku dayi kartaa xalalkayaga hoos ku qoran oo aan si gaar ah u kala horrayn oo arag haddii ay taasi caawinayso xallinta arrinta.

1. Hubi Korontada iyo fiilooyinka
2. Beddel Dalabka Bootka
3. Hubi qalabka bootable
4. Ka saar darawalka shabakada
5. Dami PXE
6. Cusbooneysii darawalada kaadhka shabakada
7. Dib u habeyn BIOS

Aynu eegno sharraxaadda habka ay khusayso mid kasta oo ka mid ah xalalka taxan.

1] Hubi Qalabka Korontada iyo Xargaha

Isla marka aad kombayutarkaga xoojiso, nidaamku waxa uu isku dayaa in uu ka soo kabsado dareewalka isku xidhka la habeeyay. Xidhiidhka aan habboonayn ama dabacsan ee ka dhexeeya qalabka ayaa laga yaabaa in aanu u oggolaan nidaamka inuu bootiyo oo uu keeno qaladka.

Xalkani waxa uu kaaga baahan yahay in aad si fiican u hubiso wadayaasha shabakadaada oo aad hubiso in xadhkaha korantada ay si fiican ugu xidhan yihiin oo aanay waxyeelo soo gaadhin.

2] Beddel Amarka Boot

Haddii aad rabto in aad ka bootinta network drive, hubi in drive network la dhigay meesha ugu sareysa ee nidaamka boot^{(boot order)} . Haddii kale, ku dheji meesha ugu sareysa ee goobaha BIOS .

Haddii aad rabto in aad ka soo kabsato dariiqa adag, dabadeed HDD dhig liiska ugu sarreeya. Haddi Hard Disk-gu aan lagu qorin sida ikhtiyaarka ah ee isku xigxiga boot^{(hard disk is not listed as an option in the boot sequence)} , tani waxay muujin kartaa darawal adag oo fashilmay ama isku xirka fiilada dabacsan. Haddii ay tahay kombuyuutar desktop-ka, dami, fur kiiska, oo xaqiiji in ku xidhidhiyaha dariiqaaga adag ay si adag oo sax ah ugu xidhan yihiin.

Waxa kale oo suurtogal ah in xadhiga SATA^(SATA) uu xumaado oo kombayuutarku aanu awood u lahayn inuu ogaado darawalka adag sababtoo ah fiilada SATA ee xun. ^(SATA)Haddii fiilooyinka ay si adag ugu xiran yihiin darawalka adag iyo Motherboard-ka, oo uu weli jiro qaladku, isku day inaad bedesho fiilada SATA .

Haddii fiilooyinka ay si ammaan ah ugu xiran yihiin oo aan weli la ogaanin darawalka adag, waxaa laga yaabaa inaad u baahato inaad beddesho darawalka adag. Kahor intaadan samayn, samee tijaabada SMART^{(run a S.M.A.R.T. test)} .

3] Hubi qalabka bootable

Haddii BIOS - ku si khaldan loo habeeyey oo boot USB uu leeyahay mudnaanta ugu sareysa ee taxanaha boot, BIOS waxay isku dayi doontaa inay ka soo saarto USB^(USB) marka hore. Haddii aaladda USB-ga^(USB) ee ku xiran aysan ahayn mid la kicin karo markaas waxay ka baadhi doontaa qalabka la kabi karo ee shabakadda waxaana laga yaabaa inaad hesho   qaladka Tijaabada Warbaahinta .^{(Media Test Failure)}

Ka saar qalabka USB-ga^(USB) ee dibadda si aad uga boodo bootka USB ama waxaad ku abuuri kartaa qalab USB ah oo la kabi karo^{(create a bootable USB device)} Windows 10^{(Windows 10)} kumbuyuutar ama kumbuyuutar Linux^(Linux) ama Mac ah.

Sidoo kale laba jeer hubi in amarka bootku uu habaysan yahay si uu uga bootiyo USB .

4] Ka saar darawalka shabakada

Waxa suurtogal ah in aad Windows ku rakibtay Hard Drive-kaaga, laakiin shabakada ku xidhan waxa loo dejiyay mudnaanta ugu sareysa ee nidaamka boot-ka kaas oo aan lahayn Windows ku rakiban. Kumbuyuutarku wuxuu isku dayi doonaa inuu ka bootiyo darawalka shabakada waxaana laga yaabaa inuu guuldareysto oo uu keeno qaladkan. Xaaladdan oo kale, ka saar darawalka shabakada adoo ka saaraya fiilada shabakadda.

5] Dami PXE

Xalkani wuxuu u baahan yahay inaad gasho BIOS^{(boot into BIOS)} oo aad joojiso PXE haddii aadan runtii rabin inaad isticmaasho. Sida caadiga ah waxaa loo liis gareeyaa sida Boot to Network  ama  Ethernet , waxaana badanaa laga helaa liiska Bootka^(Boot) .

6] Cusbooneysii darawalada kaararka Network

Dareewal duugoobay, maqan, ama kharriban wuxuu ka hor istaagi karaa kombayutarka inuu galo shabakada, taasoo PXE ka ilaalinaysa inay si sax ah u shaqeyso. Maadaama aad u badan tahay inaadan kombuyuutarkaaga ku dhejin karin si aad u cusboonaysiiso darawalada, waxaad u gali kartaa Habka Badbaadada^{(boot into Safe Mode)} ah ama waxaad u beddeli kartaa nidaamka boot-ka ee darawalka adag ee deegaanka. Markaad si guul leh ugu dhejiso miiska, waxaad u cusbooneysiin kartaa darawaladaada gacanta adoo isticmaalaya Maareeyaha Aaladda^{(update your drivers manually via the Device Manager)} , ama waxaad heli kartaa cusboonaysiinta darawalka ee^{(get the driver updates on the Optional Updates)} qaybta Cusbooneysiinta Ikhtiyaarka ee hoos timaada Windows Update . Waxa kale  oo aad ka soo dejisan kartaa nooca ugu dambeeyay ee darawalka^{(download the latest version of the driver)} bogga soo saaraha NIC .

Kadib cusboonaysiinta darawalada kaadhka shabakada, isku day inaad mar kale ka saarto shabakada oo arag hadii arintu la xaliyay. Haddii kale, isku day xalka xiga.

7] Dib u habeyn BIOS

Xalkani wuxuu kaaga baahan yahay inaad nadiifiso CMOS si aad dib ugu dejiso BIOS^(BIOS) -ka . Haddii qaladka PXE-E61^{(PXE-E61 error)} ay sabab u tahay hab-habboon oo BIOS ah, dib u dejinta BIOS ee qiyamkeeda caadiga ah waxay u badan tahay inay xalliso arrinta.

Waxaad dib u dejin kartaa goobta BIOS qiyamka caadiga ah adiga oo ka saaraya oo dib u gelinaya batteriga CMOS . Bateriga CMOS waa fidsan oo qaab wareegsan. Waxay u egtahay kuwa loo isticmaalo qalabka elektiroonigga ah ee lagu ciyaaro iyo saacadaha. Haddii aysan ahayn mid la guuri karo, ha isku dayin inaad ka saarto; halkii, dib u habeynta BIOS^(BIOS) ka gudaha deegaanka BIOS .

Waxaan rajeynayaa in tani ay ku caawineyso!

Boostada^{(Related post)} laxiriirta : Laptop-ka dusha sare PXE isku daygii boot waa guuldareystay^{(Surface Laptop PXE boot attempt fails)} .

Fix PXE-E61, Media test failure, check cable boot error on Windows 11/10

If yoυr desktop or laptop computer fails to bоot and throws the error; PXE-E61: Media test failure, check cable OR PXE-M0F: Exiting PXE ROM on a black screen, then this post is intended to help you. In this post, we will identify the potential causes of the error, as well as provide the most suitable solutions you can try to successfully resolve the issue.

PXE-E61, Media test failure, check cable

The error indicates a problem with your computer’s PXE. Most often, this error occurs when your boot sequence is misconfigured in your BIOS, or your boot device (usually your hard drive) cannot be read correctly because it’s physically damaged, corrupt, or crashed.

Other reasons for this error include:

• Power issue
• Damaged ethernet cable
• Hard drive or network drive is
• Damaged boot sector

In addition to the two error message in focus in this post, the following are PXE-E61 related errors:

PXE-M0F: Exiting Intel PXE ROM.

PXE-M0F: Exiting Intel Boot Agent.

No Boot Device Found. Press any key to reboot the machine.

PXE-M0F: Exiting PXE ROM

If you’re faced with this issue, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.

1. Check Power Supply and Cables
2. Change Boot Order
3. Check bootable device
4. Disconnect the network drive
5. Disable PXE
6. Update Network Card drivers
7. Reset BIOS

Let’s take a look at the description of the process involved concerning each of the listed solutions.

1] Check Power Supply and Cables

As soon as you power-on your PC, the system tries to boot from the configured bootable network drive. An improper or loose connection between the hardware may not allow the system to boot and cause the error.

This solution requires you to thoroughly inspect your network drive and make sure that power cables are properly connected and not damaged.

2] Change Boot Order

If you want to boot from a network drive, check if the network drive is placed at the top in the boot order. If not, set it at the top in the BIOS settings.

If you want to boot from the hard drive, then set the HDD at the top of the list. If the hard disk is not listed as an option in the boot sequence, this may indicate a failed hard drive or a loose cable connection. If it’s a desktop computer, power it down, open the case, and verify the connections to your hard drive are connected firmly and properly.

It’s also possible that the SATA cable is defective and the computer is not able to detect the hard drive due to a bad SATA cable. If the cables are firmly connected to the hard drive and to the motherboard, and the error still occurs, try replacing the SATA cable.

If the cables are securely connected and the hard drive still isn’t detected, you might need to replace the hard drive. Before you do, run a S.M.A.R.T. test.

3] Check bootable device

If the BIOS is misconfigured and USB boot has the highest priority in the boot sequence, the BIOS will try to boot from USB first. If the connected USB device is not bootable then it will search the bootable device in the network and you may get the Media Test Failure error.

Remove the external USB device to skip boot from USB or you can create a bootable USB device on a Windows 10 computer or on a Linux or Mac computer.

Also double-check that the boot order is configured to boot from USB.

4] Disconnect the network drive

It’s possible that you have Windows installed on your hard drive, but the connected network drive is set to the highest priority in the boot sequence which doesn’t have Windows installed on it. The computer will try to boot from the network drive and may fail and consequently trigger this error. In this case, disconnect the network drive by removing the network cable.

5] Disable PXE

This solution requires you to boot into BIOS and disable the PXE if you don’t actually want to use it. It’s normally listed as Boot to Network or Ethernet, and is usually found in the Boot menu.

6] Update Network Card drivers

An outdated, missing, or corrupted driver can prevent the computer from accessing the network, which prevents PXE from working properly. Since you most likely can’t boot to your computer to update the drivers, you can boot into Safe Mode or change the boot order to the local hard drive. Once you successfully boot to the desktop, you can either update your drivers manually via the Device Manager, or you can get the driver updates on the Optional Updates section under Windows Update. You may also download the latest version of the driver from the NIC manufacturer’s website.

After updating the network card drivers, try booting from the network once more and see if the issue is resolved. If not, try the next solution.

7] Reset BIOS

This solution requires you to clear CMOS to reset the BIOS. If the PXE-E61 error is due to a misconfigured BIOS setting, resetting BIOS to its default values will most likely fix the issue.

You can reset the BIOS setting to its default values by removing and re-inserting the CMOS battery. The CMOS battery is flat and round in shape. It looks like the ones used in electronic toys and watches. If it’s not removable, don’t try to remove it; instead, reset the BIOS from within the BIOS environment.

Hope this helps!

Related post: Surface Laptop PXE boot attempt fails.

Related posts

• Hagaaji koodka qaladka Motherboard-ka 99 kombayutarada Windows

• Fix Error 1962, Looma helin nidaamka qalliinka ee kumbuyuutarrada Windows 11/10

• Hagaaji xogta isku xidhka aan sax ahayn - cilada boot Windows

• Hagaaji qaladka diskka ama diskka aan nidaamka ahayn Shaashada madow ee Windows 11/10

• Sida loo hagaajiyo Start PXE IPV4 gudaha Windows 11/10

• Fix Boot Configuration Data File waxaa ka maqan qaar ka mid ah macluumaadka loo baahan yahay

• Hagaaji qaladka cusboonaysiinta Windows 0xC1900101-0x4000D

• Hagaaji Run DLL: eed_ec.dll, Qaybta la cayimay lama helin qalad

• Hagaaji qaladka Codsiga 0xc0150004 gudaha Windows 11/10

• Xidhmada Fix lagama diiwaan gashan karo Windows 11/10

• Hagaaji Windows 10 kama soo bixi doono USB [XALIYAY]

• Hagaaji cilada soo galitaanka dukaanka Microsoft 0x801901f4 Windows 11/10

• Rakibaadda ayaa ku guul darreystay wejigii SAFE_OS intii lagu jiray hawlgalkii BOOT

• FIX bootrec / FixBoot Access waa la diiday qaladka Windows 11/10

• Hagaaji ShellExecuteEx qalad ku fashilmay Windows 11/10

• Hagaaji aqoonsiga Event ID 7031 ama 7034 qalad marka isticmaaluhu uu baxo Windows 10 kumbuyuutarka

• Khaladaadka hagaajinta 0xC190020c, 0xC190020d, 0xC190020e, 0xC190020f

• Sida loo bootiyo ama loo hagaajiyo kumbuyuutarka Windows iyadoo la isticmaalayo Rakibaadda Warbaahinta

• Hagaaji Windows 10 Cusbooneysii Qaladka Rakiba 0x8007042B - 0x2000D

• Hagaaji Qaladka Load Application 5:0000065434 Windows 10