Haddii marka aad shid ama aad kabto kombiyuutarkaaga Windows oo aad la kulanto shaashadda madow oo leh fariinta khaladka ah ee macluumaadka qaabeynta aan sax ahayn^{(Invalid Configuration Information)} , markaa boostadan waxaa loogu talagalay inay ku caawiso. Maqaalkan, waxaanu aqoonsan doonaa sababta, sidoo kale waxaan ku siin doonaa xalalka ku haboon waxaad isku dayi kartaa inaad ka caawiso inaad saxdo arrintan.

Markaad la kulanto arrintan, waxaad heli doontaa fariinta khaladka ah ee soo socota;

Invalid configuration information – please run SETUP program
Time-of-day not set – please run SETUP program.
Press Fl/VolumeUp key to retry boot
Press F2/VolumeDown key to reboot into setup
Press F5/Home key to run onboard diagnostics

Dhacdadani waa natiijada dib-u-dejinta BIOS -ka ee cilladaha. Tan waxa keenay adigoo si badheedh ah u haynaya badhanka korontada ugu yaraan 25 ilbiriqsi. Waxa kale oo ay kicin kartaa marka aad nidaamka ku riddo boorso ama kaarka dallacaadda meel uu badhanka korontadu ku shaqaynayo muddo dheer.

Fiiro gaar^(Note) ah : Haddii aad leedahay BitLocker nidaamka , Module Platform^{(Trusted Platform Module)} la aamini karo ( TPM ) dib ayaa loo dajin doonaa taasoo keenaysa in BitLocker ay soo dedejiso furaha soo kabashada.

Macluumaadka isku xidhka aan sax ahayn Configuration Information – Windows 11/10 qalad boot

Haddii aad la kulanto qaladkan macluumaadka^{(Invalid Configuration Information)} isku xidhka aan sax ahayn , waxaad isku dayi kartaa xalalkayaga sida ay u kala horreeyaan hoos oo arag haddii ay taasi caawinayso xallinta arrinta.

1. Dib u deji ikhtiyaaradaada caadiga ah ee BIOS
2. Beddel batteriga CMOS

Aynu eegno sharraxaadda habka ay khusayso mid kasta oo ka mid ah xalalka taxan.

1] Dib u deji ikhtiyaaradaada caadiga ah ee BIOS

Haddii nidaamka lagu sawiray BIOS -ka loo dejiyay Habka Dhaxalka^{(Legacy Mode)} , dib u dajinta BIOS -kan waxa uu nidaamka gelin doonaa qaabayn boot-la'aan ah maadaama goobta caadiga ah ee BIOS ay tahay UEFI . Haddii aad ku shaqaynaysay habka Legacy , waxaad u baahan doontaa inaad riixdo F2 si aad u gasho BIOS oo aad u bedesho amarka bootka ee dhaxalka, ka dibna dib u bilaw nidaamka. Waxa kale oo aad u baahan doontaa in aad riixdo F1 si aad u bootin (sababtoo ah wakhtiga iyo taariikhda aan la dejin) ka dib Windows waa in ay si toos ah u cusbooneysiiso wakhtiga iyo taariikhda.

Xalkani wuxuu u baahan yahay inaad raacdo tilmaamaha hagaha ee shaashadda si aad u riixdo  Furaha F2, ^{(F2 Key, )} (haddii lagu dhejiyo kiiboodhka) ama  badhanka Volume Down si^{(Volume Down button)}  aad u gasho menu BIOS.

Marka aad gasho BIOS-ka dib u deji ikhtiyaaradaada caadiga ah ee BIOS , ka dib xaqiiji taariikhda iyo wakhtiga inay sax yihiin oo beddel wixii ikhtiyaari ikhtiyaari ah ee BIOS ee qaabeyntaada caadiga ah ka dibna dib u bilow nidaamka.

Haddii tani ay ku guul darreysato inay xalliso Macluumaadka Isku-dhafka Ansaxsan^{(Invalid Configuration Information)} - Windows 10 qaladka boot, sii wad xalka xiga.

Akhri^(Read) : Xogta Isku xidhka Boot waa maqan tahay ama waxaa ku jira khaladaad .

2] Beddel batteriga CMOS

Xalkani wuxuu kaaga baahan yahay inaad bedesho batteriga CMOS kaaga Windows 10 kombayutarka oo arag haddii taasi xalliso Macluumaadka Isku xidhka Ansaxsan^{(Invalid Configuration Information)} - Windows 10 qalad boot.

Waxa laga yaabaa inaad u baahato adeegyada farsamayaqaanka qalabka wax lagu sameeyo.

Hope this helps!

Fix Invalid Configuration Information - Windows boot error

If when you рower-on or boot your Windows computer and you encounter the black screen with the error message Invalid Configuration Information, then this post is intended to help you. In this post, we will identify the cause, as well as offer the appropriate solutions you can try to help you remediate this issue.

When you encounter this issue, you’ll receive the following full error message;

Invalid configuration information – please run SETUP program
Time-of-day not set – please run SETUP program.
Press Fl/VolumeUp key to retry boot
Press F2/VolumeDown key to reboot into setup
Press F5/Home key to run onboard diagnostics

This event is the result of resetting the BIOS to defaults. This is being triggered by inadvertently holding down the power button for at least 25 seconds. It can also be triggered when you place the system in a bag or a charging card in a position where the power button may be engaged for a long period.

Note: If you have BitLocker enabled on the system, the Trusted Platform Module (TPM) will be reset causing BitLocker to prompt for the recovery key.

Invalid Configuration Information – Windows 11/10 boot error

If you’re faced with this Invalid Configuration Information error, you can try our recommended solutions in the order presented below and see if that helps to resolve the issue.

1. Reset your custom BIOS options
2. Replace the CMOS battery

Let’s take a look at the description of the process involved concerning each of the listed solutions.

1] Reset your custom BIOS options

If the system has been imaged with the BIOS set in the Legacy Mode, this BIOS reset will place the system in a no-boot configuration as the default BIOS setting is UEFI. If you had been operating in the Legacy mode, you will need to press F2 to enter the BIOS and change the boot order back to legacy, then reboot the system. You will also need to press F1 to boot (due to the time and date are not set) then Windows should update the time and date automatically.

This solution requires you to follow the guide instructions on the screen to press the F2 Key, (if attached to a keyboard) or the Volume Down button to enter the BIOS menu.

Once in the BIOS reset your custom BIOS options, then verify the date & time are correct & change any other needed BIOS menu options for your normal configuration and then restart the system.

If this fails to resolve the Invalid Configuration Information – Windows 10 boot error, continue with the next solution.

Read: Boot Configuration Data is missing or contains errors.

2] Replace the CMOS battery

This solution requires you to change the CMOS battery on your Windows 10 computer and see if that resolves the Invalid Configuration Information – Windows 10 boot error.

You may require the services of a hardware technician for this.

Hope this helps!

Related posts

• Hagaaji Qaladka Habaynta Kaydka Kaydka ee Ansaxsan ee Windows PC

• Hagaaji koodka qaladka Motherboard-ka 99 kombayutarada Windows

• Hagaaji PXE-E61, Fashilka Tijaabada Warbaahintu, Hubi qaladka kabaha fiilada ee Windows 11/10

• Fix Error 1962, Looma helin nidaamka qalliinka ee kumbuyuutarrada Windows 11/10

• 0xc0000098: Windows Boot Configuration Data kuma jiraan gelitaanka OS

• Hagaaji Windows 10 Cusbooneysii Qaladka Rakiba 0x8007042B - 0x2000D

• Ku hagaaji dhibaatooyinka Kaaliyaha Camp Boot ee Mac

• Hagaaji BOOTMGR waa la cufan yahay - Windows 10 qalad bilawga ah

• Hagaaji ShellExecuteEx wuu fashilmay; qaladka code 8235 ee Windows10

• Qalabka Dayactirka Boot-ka laba-geesoodka ah: Dib-u-hagaajinta Xogta Habaynta Bootka ee BCD

• Hagaaji qaladka faylka shaqada ee MS-DOS ee aan sax ahayn Windows 11/10

• Rakibaadda ayaa ku guul darreystay wejigii SAFE_OS intii lagu jiray hawlgalkii BOOT

• Hagaaji qaladka Runtime ee Logitech Setpoint Windows 10

• Hagaaji qaladka bilawga khadka taliska ee aan ansax ahayn Windows 11/10

• Hagaaji nidaamka hawlgalka VMware lama helin qaladka Boot

• Fix Boot Configuration Data File waxaa ka maqan qaar ka mid ah macluumaadka loo baahan yahay

• Sida loo hagaajiyo Start PXE IPV4 gudaha Windows 11/10

• Hagaaji isku xidhka App-ka Steam khaladka maqan ama aan la heli karin Windows 10

• Hagaaji Cilada Dukaanka Microsoft 0x87AF0001

• Sida loo hagaajiyo Slow SSD Boot Up times On Windows 10