Hibernation waxay u ogolaataa Windows 10 PC inuu dib u bilaabo xaalad la mid ah ka hor inta uusan tagin hibernation. Waxay ku imanaysaa anfaca markaad rabto inaad ku riddo qaabka hurdada. Si kastaba ha noqotee, haddii aad la kulanto dhibaato halka Hibernate aysan soo celin xaaladdii hore ee PC-ga, boostada ayaa kaa caawin doonta inaad xalliso dhibaatada.

Hibernate ma soo celiso xaaladdii hore ee PC-ga

Raac hababkan haddii miyir-beelku u shaqayn waayo sidii la filayey.

1. Tirtir File Hibernation
2. Ku socodsii CHKDSK Harddisk
3. Hubi BIOS ACPI S-State

Waxaad u baahan doontaa ogolaanshaha maamulka iyo aqoon kugu filan si aad u bedesho goobaha BIOS .

Haddii aad si caadi ah u gali karto, wanaagsan; Haddii kale waxaad u baahan doontaa inaad  gasho Mode Safe^{(boot into Safe Mode)} , geli Advanced Startup option screen^{(Advanced Startup options screen)} , ama  isticmaal Warbaahinta Rakibaadda si^{(use the Installation Media to boot)} aad u awoodo inaad u fuliso tilmaamaha labada talo ee ugu horreeya.

1] Tirtir File Hibernation

Daaqadaha^(Windows) waxay ku kaydisaa xaalada kombayutarka ama hibernation galka fayl wata magaca hiberfil.sys . Way fiicnaan lahayd in la tirtiro faylka hibernation. Inta aad gacanta ku tirtiri karto feylka adiga oo marka hore ka qarinaya Windows Explorer ka dibna si xoog leh u tirtiri kara - beddelkii taas, waxaan kugula talin lahaa inaad damiso oo aad dib u kiciso hibernation^{(disable and then re-enable hibernation)} . Tani waxay si toos ah uga tirtiri doontaa faylka hibernation kombiyuutarka.

Fur Command Prompt oo leh mudnaanta maamulka. Ku qor^(Type) oo taabo furaha Enter ka dib markaad amarradan ku qorto midba midka kale:

powercfg –h off

attrib -h hiberfil.sys

delete hiberfil.sys

powercfg –h on

Hubi^(Make) inaad ku jirto C Drive -ka , halkaasoo Windows lagu rakibay.

2] Ku socodsii CHKDSK Harddisk

Faylasha hibernation waxay ku kaydsan yihiin darawalka aasaasiga ah, ie, meesha Windows lagu rakibay. Waxaa laga yaabaa inay jiraan qaar ka mid ah musuqmaasuqa, sida qaybta xun, iyo faylka waa qayb ka mid ah qaybtaas. Xaaladdaas, Windows waxay ku guuldareysan doontaa inay ku keydiso gobolka faylka, mana heli doontid natiijada la filayo.

Fur Command Prompt oo leh ogolaanshaha maamulka, ka dibna ku qor amarka soo socda si aad u socodsiiso utility chkdsk^{(run the chkdsk utility)} .

chkdsk c: /f /r

• /f ikhtiyaarku wuxuu hagaajiyaa khaladaadka saxanka. Waxa laga yaabaa inay ka digto jeeggu inuu dhaco dib-u-bilow ka dib.
• /r doorashada waxay soo saartaa qaybo xun waxayna soo ceshataa macluumaadka la akhriyi karo.

Marka hawshu dhammaato, kombayutarka dhig, oo ku soo celi xaaladdiisii ​​caadiga ahayd. Haddii aad arki karto gobol la mid ah sidii hore, markaa arrintu waa la xalliyay.

3] Hubi BIOS ACPI S-State

BIOS si khaldan loo habeeyey waxa kale oo ay keeni kartaa hibernation dhaqan xumo. Markaas, waa inaad laba shay samaysaa.

• Midda koowaad waa in la cusboonaysiiyo BIOS^{(update the BIOS)} -ka nooca ugu dambeeya.
• Marka labaad, hubi habaynta ACPI S-states ee ku jira BIOS kaaga .

Gobolada hibernation waxaa badanaa lagu magacaabaa S4, S5, ama S6 ama qayb la xidhiidha heegan, hibernation ama koronto . Hubi inaad mid mid u beddesho, oo hubi haddii ay wax isbeddel ahi hagaajiyaan dhibaatada hibernation.

Waxaan rajeynayaa in mid ka mid ah talooyinkan ay kaa caawineyso inaad xalliso dhibaatada, iyo hibernation-ku wuxuu u shaqeeyaa sidii la filayey adiga Windows 10 PC.

Hibernate does not restore the previous state of the PC. How to fix it?

Hibernation allows Windows 10 PC to resume the same state as before it went to hibernation. It comes in handy when you do want to put it in sleep mode. However, if you face a problem where Hibernate does not restore the previous state of the PC, this post will help you resolve the problem.

Hibernate does not restore the previous state of the PC

Follow these methods if the hibernation is not working as expected.

1. Delete Hibernation File
2. Run CHKDSK on Harddisk
3. Check BIOS ACPI S-States

You will need admin permission and enough knowledge to change settings in the BIOS.

If you can log in normally, good; else you will have to boot into Safe Mode, enter the Advanced Startup options screen, or use the Installation Media to boot to be able to carry out the instructions for the first two suggestions.

1] Delete Hibernation File

Windows stores the state of the computer or hibernation into a file with the name hiberfil.sys. It would be best to delete the hibernation file. While you can manually delete the file by first unhiding it in Windows Explorer and then forcefully delete it – instead of that, I would recommend you to disable and then re-enable hibernation. This will automatically delete the hibernation file from the computer.

Open Command Prompt with admin privileges. Type and press the Enter key after typing these commands one after the other:

powercfg –h off

attrib -h hiberfil.sys

delete hiberfil.sys

powercfg –h on

Make sure you are on the C Drive, where Windows is installed.

2] Run CHKDSK on Harddisk

Hibernation files are stored in the primary drive, i.e., where Windows is installed. There may be some corruption, such as bad sector, and the file is part of that sector. In that case, Windows will fail to save the state into the file, and you will not get the expected result.

Open Command Prompt with admin permission, and then type the following command to run the chkdsk utility.

chkdsk c: /f /r

• /f option fixes errors on the disk. It may warn about the check to take place post-reboot.
• /r option locates bad sectors and recovers readable information.

Once the process completes, hibernate the computer, and bring it back to its normal state. If you can see the same state as before, then the issue has been resolved.

3] Check BIOS ACPI S-States

A misconfigured BIOS can also cause hibernation to misbehave. In that case, you will have to do two things.

• The first is to update the BIOS to the latest version.
• Second, check the settings for ACPI S-states in your BIOS.

Hibernation states are usually named S4, S5, or S6 or a section related to standby, hibernation or power. Make sure to change it one by one, and check if any changes fix the hibernation problem.

I hope one of these suggestions helps you to resolve the problem, and hibernation works as expected in your Windows 10 PC.

Related posts

• Sida loo xidho, dib u bilaabo, loo seexdo, loo seexdo, loo xidho Windows 11/10

• Ma u wareejin karaa feylka hiberfil.sys darawal kale Windows 11/10?

• Daar ama dami hibernation addoo isticmaalaya khadka taliska PowerCFG

• Dooro waxa xidhidhiyaha Laptop-ka uu qabto: Xiritaanka, Hibernate, Sleep

• Sida loo hibernate tabs gudaha Chrome iyo Firefox browser

• Faylka hibernation aad buu u weyn yahay? Iska yaree cabbirka hiberfil.sys gudaha Windows 10

• Sida loo dhaqaajiyo ikhtiyaarka Hibernate gudaha Windows 10

• Waa maxay Farqiga u dhexeeya Hurdada iyo Hibernate gudaha Windows 10?

• Xulashada hibernate ayaa ka maqan Panel-ka kantaroolka gudaha Windows 11/10

• Sida loo suurtageliyo Hibernate Mode gudaha Windows 11

• Miyaan seexdaa, hurdaa ama xidhaa Windows PC habeenkii?