Marka aad isku daydo in aad rakibto xirmo Microsoft Windows Installer , waxa aad heli kartaa fariinta khaladka ah ee soo socota: Error 1603: Khalad dilaa ah ayaa dhacay intii lagu jiray rakibidda. Haddii aad gujiso OK sanduuqa fariinta, rakibaadda dib ayaa loo rogaa.

Sababta Khaladka 1603: Khalad dilaa ah ayaa dhacay markii la rakibay

Waxaa laga yaabaa inaad hesho fariintan khaladka ah haddii mid ka mid ah shuruudaha soo socda uu run yahay:

1. Galka aad isku dayayso inaad ku rakibto xidhmada Windows Installer waa la siryay.

2. Drive-ka ka kooban galka aad isku dayayso inaad ku rakibto xidhmada Windows Installer waxa loo gelayaa bedel ahaan.

3. Akoonka SYSTEM kuma laha ogolaanshaha kontoroolka buuxa^{(Full Control)} ee galka aad isku dayayso inaad ku rakibto xidhmada Windows Installer sidoo kale. Waxaad dareemeysaa fariinta qaladka sababtoo ah adeegga Windows Installer wuxuu isticmaalaa koontada SYSTEM si loo rakibo software-ka. Halkan ka akhriso sida loo rakibo Software-ka iyada oo aan la helin xuquuqda maamulka. ^{(How to Install Software Without Admin Rights here.)}. Halkan ka akhriso sida loo rakibo Software-ka iyada oo aan la helin xuquuqda maamulka. ^{(How to Install Software Without Admin Rights here.)}.

Fix Error 1603 : Khalad dilaa ah ayaa dhacay markii la rakibay

Si aad si otomaatig ah u xalliso arrintan isticmaal qalabka hagaajinta ee Microsoft^{(fix it tool by Microsoft’s)} .

Hadda haddii ta sare ku shaqayn waydo, raac tilmaantan:

1)Laba jeer guji " PC-ga^{(This PC)} " ee ku yaal miiskaaga.

2) Midig ku dhufo^{(Right-click)} darawalka meesha aad rabto inaad ku rakibto barnaamijka oo dooro " ^{(Choose “)}Properties. "

3) Guji tab " Security " ka dibna dhagsii badhanka " Edit ".

4) Hubi " Oggolow^(Allow) " oo ku xigta " Control Full^{(Full Control)} " hoos ciwaanka hoosaadka " Ogolaanshaha^{(Permissions)} " gudaha magaca isticmaalaha " SYSTEM " oo guji " Codso^(Apply) "ka dibna "OK."

5)Hadii aad ka heli waydo "SYSTEM" halkaas, ka dib dhagsii " Ku dar^(Add) " oo ku qor magaca shayga hoostiisa " SYSTEM " dhagsii "OK" oo ku celi tallaabada 4.

6)Hadda ku noqo qaybta Amniga^(Security) oo guji " Advanced. "

7) Hubi " Ku beddel qoraallada oggolaanshaha dhammaan walxaha ilmaha oo wata qoraallada halkan ku yaal ee khuseeya walxaha ilmaha. ^{(Replace permission entries on all child objects with entries shown here that apply to child objects.)}" Guji "OK." Hubi " Dib u habeyn oggolaanshaha dhammaan walxaha ilmaha oo awood faafinta oggolaanshaha la dhaxli karo^{(Reset permissions on all child objects and enable propagation of inheritable permissions)} " haddii aad isticmaasho noocyada kale ee Windows . Guji "OK."

8) Guji " Haa^(Yes) " marka laguu sheego.

9) Laba-guji^{(Double-click)} xirmada rakibaha oo wax dhibaato ah kuma yeelan doontid.

Habka 2: Ku rakib Hack Registry Registry^{(Ownership Registry Hack)}

1. Soo^(Download) deji oo fur faylasha.

2.Double-guji faylka InstallTakeOwnership.reg .

3.Right-guji faylka siinaya qaladka 1603 oo dooro lahaanshaha^{(Error 1603 and select take Ownership)} .

4.Again isku day inaad ku rakibto xirmada rakibaha iyo arrintu si guul leh ayey u go'an tahay.

5.Haddii sabab qaar ka mid ah aad rabto in aad tirtirto Install Lahaanshaha^{(Install Ownership)} Shortcut , kaliya laba jeer guji RemoveTakeOwnership.reg file.

Habka 3: Dib u bilaw Adeegga rakibaha Windows^{(Windows Installer Service)}

1.Riix Windows Key + R kadibna ku qor services.msc oo ku dhufo Enter.

2.Raadi adeega Windows Installer^{(Windows Installer service)} kadibna midigta ku dhufo oo dooro Properties.

3. Guji Start haddi adeeggu aanu hore u shaqayn.

4.Haddii adeeggu uu horay u socday ka dibna midig-guji oo dooro Dib u bilow.^(Restart.)

5. Mar labaad isku day in aad rakibto barnaamijka kaas oo marin u hela qaladka loo diiday.

Habka 4:  Dib-u-diiwaangelinta rakibaha Windows^{(Re-register Windows Installer)}

1.Riix Windows Key + X kadibna dooro Command Prompt (Admin).

2. Ku qor amarka soo socda cmd oo ku dhufo Enter mid kasta:

%windir%\system32\msiexec.exe /unregister
%windir%\system32\msiexec.exe /regserver
%windir%\syswow64\msiexec.exe /unregister
%windir%\syswow64\msiexec.exe /regserver

3.Reboot your PC si aad u badbaadiso isbedelada.

4.Hadii arinta la xalin waayo taabo Windows key + R kadibna ku qor kan soo socda oo ku dhufo Enter:

%windir%\system32

5. Hel faylka Msiexec.exe ka dibna qor ciwaanka saxda ah ee faylka kaas oo noqon lahaa wax sidan oo kale ah:

C:\WINDOWS\system32\Msiexec.exe

6.Riix Windows Key + R kadibna ku qor regedit^(regedit) oo ku dhufo Enter si aad u furto Registry Editor .

7. U gudub furaha diiwaangelinta:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer

8. Dooro MSIServer^(MSIServer) ka dib daaqadda midig ee daaqadda laba jeer guji ImagePath.

9.Hadda ku qor meesha uu ku yaal faylka Msiexec.exe^{( Msiexec.exe file)} oo aad kor ku xustay goobta xogta qiimaha oo ay ku xigto "/ V" oo dhan ayaa u ekaan doona:

C:\WINDOWS\system32\Msiexec.exe /V

10.Boot your PC galay hab nabdoon adigoo isticmaalaya mid ka mid ah hababka halkan ku qoran.^{(methods listed here.)}

11.Press Windows Key + X then select Command Prompt (Admin).

12.Type the following command and hit Enter:

msiexec /regserver

%windir%\Syswow64\Msiexec /regserver

13.Close everything and boot your PC normally.

Recommended for you:

• How to fix BOOTMGR is missing Windows 10
• Fix Driver Power State Failure Windows 10
• Fix We couldn’t complete the updates, Undoing changes
• How to fix Automatic Repair couldn’t repair your PC

That’s it you have successfully fix Error 1603: A fatal error occurred during installation but if you still have any questions you can ask them in the comments section.

Fix Error 1603: A fatal error occurred during installation

When you try to install a Microsоft Windows Installer package, you may receive the following error mеssage: Error 1603: A fatal error occurred during installatіon. If you click OK in the message box, the installation rolls bаck.

Cause for Error 1603: A fatal error occurred during installation

You may receive this error message if any one of the following conditions is true:

1. The folder that you are trying to install the Windows Installer package is encrypted.

2. The drive that contains the folder that you are trying to install the Windows Installer package is accessed as a substitute drive.

3. The SYSTEM account does not have Full Control permissions on the folder that you are trying to install the Windows Installer package too. You notice the error message because the Windows Installer service uses the SYSTEM account to install the software. Read How to Install Software Without Admin Rights here.. Read How to Install Software Without Admin Rights here..

Fix Error 1603: A fatal error occurred during installation

For automatically fixing this issue use the fix it tool by Microsoft’s.

Now if the above didn’t work out for you then follow this guide:

1)Double click “This PC” on your desktop.

2)Right-click the drive where you want to install the program and Choose “Properties.“

3)Click the “Security” tab and then click the “Edit” button.

4)Check “Allow” next to “Full Control” under the subheading “Permissions” inside the user name “SYSTEM” and click “Apply” then “OK.”

5)If you can’t find “SYSTEM” there, then click “Add” and under object name write”SYSTEM” click “OK” and repeat the step 4.

6)Now go back to the Security tab and click on “Advanced.“

7)Check “Replace permission entries on all child objects with entries shown here that apply to child objects.” Click “OK.” Check “Reset permissions on all child objects and enable propagation of inheritable permissions” if you use other versions of Windows. Click “OK.”

8)Click “Yes” when prompted.

9)Double-click the installer package and you will no longer have any issues with it.

Method 2: Install Ownership Registry Hack

1.Download and unzip the files.

2.Double-click the InstallTakeOwnership.reg file.

3.Right-click the on the file which is giving the Error 1603 and select take Ownership.

4.Again try to install the installer package and the issue is successfully fixed.

5.If for some reason you want to delete the Install Ownership shortcut, just double click RemoveTakeOwnership.reg file.

Method 3: Restart the Windows Installer Service

1.Press Windows Key + R then type services.msc and hit Enter.

2.Find Windows Installer service then right-click on it and select Properties.

3.Click on Start if the service is not already running.

4.If the service is already running then right-click and select Restart.

5.Again try to install the program which was giving access denied error.

Method 4: Re-register Windows Installer

1.Press Windows Key + X then select Command Prompt (Admin).

2.Type the following command into cmd and hit Enter after each one:

%windir%\system32\msiexec.exe /unregister
%windir%\system32\msiexec.exe /regserver
%windir%\syswow64\msiexec.exe /unregister
%windir%\syswow64\msiexec.exe /regserver

3.Reboot your PC to save changes.

4.If the issue is not resolved then press Windows key + R then type the following and hit Enter:

%windir%\system32

5.Locate the Msiexec.exe file then note down the exact address of the file which would be something like this:

C:\WINDOWS\system32\Msiexec.exe

6.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

7.Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer

8.Select MSIServer then in the right window pane double-click on ImagePath.

9.Now type the location of the Msiexec.exe file which you noted above in the value data field followed by “/V” and the whole thing would look like:

C:\WINDOWS\system32\Msiexec.exe /V

10.Boot your PC into safe mode using any of the methods listed here.

11.Press Windows Key + X then select Command Prompt (Admin).

12.Type the following command and hit Enter:

msiexec /regserver

%windir%\Syswow64\Msiexec /regserver

13.Close everything and boot your PC normally.

Recommended for you:

• How to fix BOOTMGR is missing Windows 10
• Fix Driver Power State Failure Windows 10
• Fix We couldn’t complete the updates, Undoing changes
• How to fix Automatic Repair couldn’t repair your PC

That’s it you have successfully fix Error 1603: A fatal error occurred during installation but if you still have any questions you can ask them in the comments section.

Related posts

• Hagaaji qaladka 0X80010108 gudaha Windows 10

• Sida loo hagaajiyo Qaladka Codsiga 0xc0000005

• Hagaaji Koodhka Cilada Cusboonaysiinta Windows 0x80072efe

• Sida loo hagaajiyo Khaladka Codsiga 5:0000065434

• Khaladaadka BAD_SYSTEM_CONFIG_INFO hagaaji

• Hagaajin Aan Awoodin in la Dejiyo Cilada Daabacaha Hore 0x00000709

• Hagaaji Cilada Cusboonaysiinta Windows 0x80070020

• Hagaaji qaladka Minecraft wuu ku guul daraystay inuu qoro qudaarta qudaarta

• Hagaaji Cilada Omegle Ku Xidhida Serverka (2022)

• Hagaaji Cilada Cusboonaysiinta Windows 0x80246002

• Hagaaji Khaladka 0x8007000e Ka Hortagga Kaabta

• Sida loo hagaajiyo Qaladka Codsiga 523

• Hagaaji Koodhka Hawlgelinta Xafiiska 0xC004F074

• Hagaaji Cilada Difaaca Daaqadda 0x800705b4

• Hagaaji Cilada Cusboonaysiinta Windows 0x800704c7

• Hagaaji Khaladka Culayska Codsiga Steam 3:0000065432

• Hagaaji PNP ee la Ogaaday Cilad Dhimasho ah Windows 10

• Hagaaji Ilaha Nidaam Aan ku filnayn si loo dhamaystiro Ciladda API

• Sida Loo Hagaajiyo Gelitaanka Google Drive Cilad La Diiday

• Hagaaji Gelitaanka Rakibaadaha Daaqadaha Windows