Haddii aad helayso  Cilad 1058, Adeegga lama bilaabi karo^{(Error 1058, The service cannot be started)} fariinta marka la bilaabayo adeegga Maareeyaha Adeegyada ^(Manager)Windows ^(Services) Windows 11/10 , xalalka soo socda ayaa adiga ku anfacaya. Waxaa jiri kara sababo kala duwan sababta uu qaladkan ugu dhacay kombayutarkaaga. Si kastaba ha ahaatee, waxaad ku hagaajin kartaa daqiiqado gudahood adiga oo baddalaya dhowr goobood halkan iyo halkaas.

Dhambaalka khaladku wuxuu leeyahay wax sidan oo kale ah:

Error 1058: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

Ciladani waxay inta badan u dhacdaa sababtoo ah joojinta degdega ah ee adeega sababtoo ah waxoogaa isku dhac gudaha ah ama isbeddelka goobaha. Ku dhawaad^(Almost) ​​dhammaan adeegyadu waxay ku xidhan yihiin adeeg kale, waxaana loo yaqaan  Ku-tiirsanaanta adeegga Windows^{(Dependencies of a Windows service)} .

Tusaale ahaan, adeegga Cusbooneysiinta Windows^{(Windows Update)} wuxuu ku xiran yahay Daahfuriyaha Geedi socodka Serverka DCOM^{(DCOM Server Process Launcher)} iyo RPC Endpoint Mapper . Xitaa haddii mid iyaga ka mid ah uusan u socon sidii la rabay, waxaa laga yaabaa inaad la kulanto ciladan markaad bilaabayso adeegga Cusbooneysiinta Windows ee guddiga ^{(Windows Update)}Adeegyada^(Services) .

Ciladani waxay dhici kartaa marka la bilaabayo ku dhawaad ​​adeeg kasta oo ku jira guddiga adeegyada^(Services) . Xalku waa in la hubiyo in dhammaan ku tiirsanaanta ay socdaan iyo in kale. Marka laga reebo taas, waxaad u baahan tahay inaad hubiso in adeegga aasaasiga ahi uu leeyahay goobta saxda ah iyo in kale.

Khaladka nidaamka^(System) 1058 ayaa dhacay, adeegga lama bilaabi karo

Si loo xaliyo Khaladka 1058^{(Error 1058)} , Adeegga lama bilaabi karo qalad, raac tillaabooyinkan:

1. Ka raadi  adeegyada ^(services ) sanduuqa raadinta Taskbar.
2. Guji natiijada shakhsi ahaaneed
3. Soo ogow adeegga arrinta keenaya.
4. Laba jeer ku dhufo
5. U dooro  nooca bilowga ^{(Startup type )} si  toos ah^(Automatic) .
6. Guji  badhanka Start 
7. U  beddel tabka Ku-tiirsanaanta  .^{(Dependencies )}
8. U fiirso dhammaan adeegyada lagu sheegay sanduuqa.
9. Guji  badhanka OK 
10. U fur adeegyada la xusay mid ka dib.
11. Guji  badhanka Start 
12. Guji  badhanka OK  si aad u badbaadiso isbeddelka

Marka hore, waxaad u baahan tahay inaad furto  guddiga Adeegyada ^{(Services )(open the Services panel)} ee kumbuyuutarkaaga. Taas awgeed, dhagsii sanduuqa raadinta Taskbar , nooca  adeegyada^(services) , oo guji natiijada raadinta shaqsiyeed.

Marka xigta, soo ogow adeegga qaladka keenaya oo laba jeer guji. Waa in loo dejiyaa sidii loo  joogsaday^(Stopped) . Waxaad u baahan tahay inaad balaadhiso  liiska hoos-u-dhaca  nooca Startup  oo dooro ikhtiyaarka ^{(Startup type )}tooska ^{(Automatic )} ah.

Kadib, dhagsii  badhanka Start  .

Waa inay isla markiiba bilaabataa. Si kastaba ha noqotee, haddii aysan bilaaban, waxaad u baahan tahay inaad u  gudubto tab ku tiirsanaanta ^{(Dependencies )} , ogow dhammaan adeegyada lagu sheegay sanduuqa, oo guji  badhanka OK  .

Maadaama adeegaaga aasaasiga ahi uu ku xidhan yahay adeegyadan, waxa aad u baahantahay in aad midba mid furto oo aad gujiso  badhanka Start  .

Marka la sameeyo, mar labaad fur adeegga aasaasiga ah, ka dooro  ikhtiyaarka  tooska  ah ee ^{(Automatic )}nooca Startup ^{(Startup type )} menu drop-down, oo guji  badhanka Start  .

Hadda, adeeggaagu wuxuu ku bilaabmayaa dhibaato la'aan.

Waxaad bedeli kartaa  nooca bilowga ^{(Startup type )} ee adeegga adoo isticmaalaya Tifaftiraha Diiwaangelinta^{(Registry Editor)} sidoo kale. Si kastaba ha ahaatee, waa inaad taqaan magaca adeegga ee REGEDIT . Waxaad isticmaali kartaa PowerShell si aad u soo saarto magacyada Adeegyada Windows .

Tusaale ahaan, Adeegga Wareejinta^{(Background Intelligent Transfer Service)} garaadka ee asalka ah waxaa loo yaqaan BITS ama Windows Search waxaa loo yaqaan WSearch , iyo wixii la mid ah. Haddii aad hore u ogeyd, waxaad raaci kartaa tillaabooyinkan:

Riix  Win+R  si aad u furto Run .

Ku qor  regedit  > taabo  badhanka Gelida ^(Enter ) >guji  ikhtiyaarka Haa  .^(Yes )

U gudub jidkan:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services

Dooro adeegga aasaasiga ah oo laba-guji  qiimaha DWORD Start  .

U deji xogta Qiimaha sida  2  oo dhagsii  badhanka OK  .

Laba jeer dhagsii  DependOnService  oo qor magacyada koodhka adeegga.

Fur^(Open) furayaasha ku-tiirsanaanta> laba-guji  qiimaha Start  DWORD.

U deji xogta Qiimaha sida  2  oo dhagsii  badhanka OK  .

Dib u bilaw kombayutarkaga

Intaa ka dib, wax dhib ah kala kulmi maysid bilaabista adeega.

Cilad^{(Troubleshoot)} -bixinta : Adeegyada Windows ma bilaaban doono^{(Windows Services will not start)} .

Sideed u hagaajisaa qaladka 1058 Adeegga^(Service) lama bilaabi karo?

Waxaad hagaajin kartaa Khaladaadka 1058: Adeegga laguma bilaabi karo qaladka adiga oo  si toos ah ^{(Automatic )} u  dooranaya nooca bilowga ah^{(Startup type)}  ee guddiga adeegyada^(Services) . Haddii kale, waxaad bedeli kartaa isla adiga oo isticmaalaya Tifaftiraha Diiwaangelinta^{(Registry Editor)} . Taas awgeed, waxaad u baahan tahay inaad raacdo tillaabooyinka aan soo sheegnay.

Sideen u hagaajiyaa adeegga Windows Update oo aan shaqayn?

Haddii  adeegga Cusbooneysiinta Windows uusan ku shaqeyn  kombayutarka, waxaad u baahan tahay inaad hubiso ku tiirsanaanta mid ka mid ah. Markaad dejiso nooca bilawga saxda ah^(Startup) ee guddiga Adeegyada^(Services) , adeeggani wuxuu bilaabi doonaa inuu socdo.

Waa intaas! Waxaan rajeynayaa in hagahan uu caawiyay.

Akhri: ^{(Read: )}Adeegga Cusbooneysiinta Daaqadaha lama joojin karo.^{(The Windows Update service could not be stopped.)}

System error 1058 has occurred, The service cannot be started

If уou are getting Error 1058, The service cannot be started message while starting a service in the Services Manager on Windows 11/10, the following solutions will be handy for you. There could be different reasons why this error occurs on your computer. However, you can fix it within moments by changing a few settings here and there.

The entire error message says something like this:

Error 1058: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

This error occurs mainly because of the sudden termination of service due to some internal conflict or change of settings. Almost all the services depend on some other service, and it is called Dependencies of a Windows service.

For example, the Windows Update service depends on DCOM Server Process Launcher and RPC Endpoint Mapper. Even if one of them is not running as it should be, you might encounter this error while starting the Windows Update service in the Services panel.

This error can occur while starting almost any service included in the Services panel. The solution is to check if all the dependencies are running or not. Apart from that, you need to check if the primary service has the correct setting or not.

System error 1058 has occurred, The service cannot be started

To fix Error 1058, The service cannot be started error, follow these steps:

1. Search for services in the Taskbar search box.
2. Click on the individual result.
3. Find out the service that is causing the issue.
4. Double-click on it.
5. Select Startup type as Automatic.
6. Click the Start button.
7. Switch to the Dependencies tab.
8. Note down all the services mentioned in the box.
9. Click the OK button.
10. Open the noted services one after one.
11. Click the Start button.
12. Click on the OK button to save the change.

At first, you need to open the Services panel on your computer. For that, click on the Taskbar search box, type services, and click on the individual search result.

Next, find out the service that is causing the error and double-click on it. It must be set as Stopped. You need to expand the Startup type drop-down list and select the Automatic option.

Then, click the Start button.

It should start immediately. However, if it is not starting, you need to switch to the Dependencies tab, find out all the services mentioned in the box, and click the OK button.

As your primary service depends on these services, you need to open them one after one and click on the Start button.

Once done, again open the primary service, choose the Automatic option from the Startup type drop-down menu, and click the Start button.

Now, your service will start without any problem.

You can change the Startup type of a service using Registry Editor as well. However, you must know the name of the service in REGEDIT. You could use PowerShell to generate the names of Windows Services.

For example, the Background Intelligent Transfer Service is called BITS or Windows Search is called WSearch, and so on. If you already know that, you can follow these steps:

Press Win+R to open the Run prompt.

Type regedit > press the Enter button > click the Yes option.

Navigate to this path:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services

Select the primary service and double-click on the Start DWORD value.

Set the Value data as 2 and click the OK button.

Double-click on the DependOnService and note down the service code names.

Open those dependencies’ keys > double-click on the Start DWORD value.

Set the Value data as 2 and click the OK button.

Restart your computer.

After that, you won’t have any problem starting a service.

Troubleshoot: Windows Services will not start.

How do you fix error 1058 the Service Cannot be started?

You can fix Error 1058: The service cannot be started error by choosing Automatic as the default Startup type in the Services panel. Alternatively, you can change the same using Registry Editor. For that, you need to follow the aforementioned steps.

How do I fix Windows Update service not running?

If the Windows Update service is not running on your computer, you need to check the dependencies one after one. Once you set the correct Startup type in the Services panel, this service will start running.

That’s all! Hope this guide helped.

Read: The Windows Update service could not be stopped.

Related posts

• Sida loo dejiyo oo loo habeeyo Adeegyada Goobta gudaha Windows 11 -

• 9 siyaabood oo lagu galo Adeegyada Windows (dhammaan noocyada)

• Adeegyada Wadaagista Faylka Qarsoon ee Bilaashka ah - Wadaag faylasha si qarsoodi ah

• Daaqadaha ma bilaabi karin adeegga Ilaalinta Software-ka

• Sideen awood ugu yeeshaa Taabo Kiiboodhka iyo Adeegga Guddi-qorista?

• Sida looga saaro Adeegyada Camp Boot Windows on Mac

• Adeegga wareejinta garaadka ee asalka ah oo aan shaqaynayn Windows 11/10

• Adeegga rakibaha Windows ayaa ka maqan maamulaha adeegyada Windows 11/10

• Waa maxay TrustedInstaller.exe gudaha Windows 11/10?

• Ka bax, ilaali sirtaada markaad isticmaalayso Adeegyada Google

• Sida loo joojiyo Adeegga Gudaha ee Windows 10

• Adeegga Cusbooneysiinta Windows ayaa ka maqan Windows 11/10

• Software-ka Buuga Xusuus-qorka Dijital ah ee Sugan ee Bilaashka ah ee ugu Fiican & Adeegyada khadka

• Sida loo soo saaro liiska ku ordaya, la joojiyay, adeegyada naafada gudaha Windows 10

• Hagaaji Adeegyada Domain Directory Active hadda lama heli karo

• Arag, Bilow, Jooji, Maamul Adeegyada la rakibay & Darawalada addoo isticmaalaya ServiWin

• Hagaaji Adeegga Cusbooneysiinta Windows Server Code 0x80072EE6

• Hagaaji dhacdada ID7001 Maareeyaha Xakamaynta Adeegga Windows 11/10

• Adeegga Wadaagga Dekedda ee NET.TCP wuu ku guul daraystay inuu bilaabo Windows 11/10

• Sida loo dami karo khaladka gaynta gudaha Adeegga Wakhtiga Windows