Haddii marka aad isku daydo inaad ku abuurto nidaamka sawirkaaga^{(create a system image backup)} Windows 10 qalabka, oo hawlgalku ku guuldareysto qaladka codes 0x807800C5 iyo 0x80780081^{(error codes 0x807800C5 and 0x80780081)} , ka dibna boostadan waxaa loogu talagalay inay ku caawiso. Maqaalkan, waxaan ku siineynaa xalalka ugu habboon ee si degdeg ah loo xalliyo arrintan.

Ku guuldareysiga diyaarinta sawirka kaabiska ee mid ka mid ah mugga kaydinta

Markaad la kulanto arrintan, waxaad heli doontaa fariinta khaladka ah ee soo socota;

Create a system image
The backup failed.
There was a failure in preparing the backup image of one of the volumes in the backup set. (0x807800C5)
Additional Information:
The specified backup disk cannot be found. (0x80780081)

Khaladaadka Sawirka Nidaamka^{(System Image Backup)} 0x807800C5, 0x80780081

Haddii aad la kulanto mid ka mid ah summadan khaladka ah, waxaad isku dayi kartaa xalalkayaga lagu taliyay oo arag haddii mid iyaga ka mid ahi uu kaa caawinayo xallinta arrinta.

1. Ka xoree booska kaydinta ee darawalka bartilmaameedka
2. Ka saar Qaybta EFI wadidii^{(EFI Partition)} hore (waxay khusaysaa habaynta saxanka badan)
3. Si ku-meel-gaar ah u dami software-kaaga
4. Ka fuli hawlgalka Gobolka Boot Clean^{(Clean Boot State)}
5. Isticmaal software sawir-qaadista qolo saddexaad

Aynu eegno sharraxaadda habka ay khusayso mid kasta oo ka mid ah xalalka taxan.

1] Ka xoree^(Free) booska kaydinta ee darawalka bartilmaameedka

Haddii aad isku dayayso in aad ku abuurto sawirka nidaamka darawal dibadeed leh oo aan ku filnayn meel wax lagu kaydiyo, waxa ay u badan tahay in aad la kulanto ciladan. Xaaladdan oo kale, waa in aad xoreeyso booska diskka ee darawalka bartilmaameedka, adigoo u wareejinaya faylashaada darawal kale ama u wareejinaya faylkaaga adeegga kaydinta daruuraha^{(cloud storage service)} .

Kadib markaad faylashaada ka soo guurto saxanka ama aysan jirin xog muhiim ah oo ku jirta saxanka bartilmaameedka ah, waxaad hadda u qaabayn kartaa NTFS^{(format it to NTFS)} ka dibna waxaad bilaabi kartaa inaad abuurto sawir nidaam mar kale.

2] Ka saar^(Remove) Qaybta EFI wadidii^{(EFI Partition)} hore (waxay khusaysaa habaynta saxanka badan)

Isticmaalayaasha kombuyuutarrada kuwaas oo lahaa qaabkan soo socda ee isku midka ah ayaa la kulma arrintan:

Daaqadaha^(Windows) markii hore waxa lagu rakibay saxan laakiin markii dambe waxa loo raray/u guuray rakibaadda disk kale oo isla kombayutarka ku jira. Waxa loo habeeyey saxanki hore si uu badh ugu isticmaalo kaabta sawirka System^{(System Image Backup)} iyo badh kaydinta. Hadda, abuurista kaydinta sawirka nidaamka ee diskki hore waxay kicisaa labadan khalad. Halkan, dhibaatadu waxay ahayd in darawalkii hore uu weli lahaa labada qaybood ( EFI System Partition and Recovery Partition ) ee Windows hore .

Xaaladdan, si loo xalliyo arrinta, fur Maareynta Disk^{(open Disk Management)} oo tirtir^{(delete )} labadaas qaybood. Haddii kale, waxaad isticmaali kartaa DiskPart^{(use DiskPart)} si aad u tirtirto qaybaha. Marka la tirtiro, dib u bilow kombuyutarkaaga oo isku day mar labaad nidaamka sawirka sawirka - hawlgalku waa inuu dhammaystiraa iyada oo aan khaladaadkan.

Akhri^(Read) :  Kaabta Nidaamka Sawirka waxay ku fashilantay furaha qaladka 0x807800C5 iyo 0x80070020^{(System Image Backup fails with error codes 0x807800C5 and 0x80070020)} .

3] Si ku meel gaadh^{(Temporarily)} ah u dami software kaaga

Waxa laga yaabaa in aad si ku meel gaadh ah u damiso software-kaaga ka dibna aad ku socodsiiso System Restore oo arag haddii ay taasi ku caawinayso.

4] Ka fuli^(Execute) hawlgalka Gobolka Boot Clean^{(Clean Boot State)}

Boot Nadiif ah ayaa la sameeyaa^{(Clean Boot is performed)} si loo bilaabo Windows iyadoo la adeegsanayo wadayaasha ugu yar iyo barnaamijyada bilowga. Tani waxay kaa caawinaysaa baabi'inta khilaafyada software. Xaaladda kabaha nadiifka ah, waxaad arki kartaa in hawlgalku si guul leh u dhammaaday.

5] Isticmaal software sawir-qaadista qolo saddexaad

Haddii midkoodna xalalka sare aanu shaqayn, waxaad isticmaali kartaa mid ka mid ah qaybta  3rd Imaging, Backup, and Recovery Software^{(3rd party Imaging, Backup, and Recovery Software)} for Windows 10 si aad u abuurto nambarka sawirka nidaamka.

Waxaan rajeynayaa in tani ay ku caawineyso!

Qoraallada la xiriira^{(Related posts)} :

• Kaabta Sawirka Nidaamka waxa ay ku fashilantay koodka qaladka 0x807800C5 iyo 0x8078004F^{(System Image Backup fails with error codes 0x807800C5 and 0x8078004F)} .
• Hawlgalka Adeegga Nuqulka Mugga Hadhka ayaa fashilmay (0x807800A1), Qoraagu waxa uu la kulmay khalad ku meel gaadh ah (0x800423F3).^{(Volume Shadow Copy Service operation failed (0x807800A1), The writer experienced a transient error (0x800423F3).)}

Failure in preparing Backup image, Errors 0x807800C5, 0x80780081

If when you attempt to create a system image backup on your Windows 10 device, and the operation fails with the error codes 0x807800C5 and 0x80780081, then this post is intended to help you. In this post, we provide the most suitable solutions to quickly resolve this issue.

Failure in preparing the backup image of one of the volumes in the backup set

When you encounter this issue, you’ll receive the following full error message;

Create a system image
The backup failed.
There was a failure in preparing the backup image of one of the volumes in the backup set. (0x807800C5)
Additional Information:
The specified backup disk cannot be found. (0x80780081)

System Image Backup errors 0x807800C5, 0x80780081

If you’re faced with any of these error codes, you can try our recommended solutions and see if any of them help you resolve the issue.

1. Free up storage space on the target drive
2. Remove the EFI Partition from the old drive (applies to multiple disk setup)
3. Temporarily disable your security software
4. Execute the operation in Clean Boot State
5. Use third-party imaging software

Let’s take a look at the description of the process involved concerning each of the listed solutions.

1] Free up storage space on the target drive

If you’re trying to create the system image on an external drive with insufficient storage space, you’re most likely to encounter this error. In which case, you should free up disk space on the target drive, by transferring your files to another drive or moving your file to a cloud storage service.

After you have moved your files from the disk or there is no important data on the target disk, you can now format it to NTFS and then start to create a system image again.

2] Remove the EFI Partition from the old drive (applies to multiple disk setup)

PC users who had the following similar configuration were experiencing this issue:

Windows was originally installed on a disk but later moved/migrated the installation to another disk on the same computer. Formatted the old disk to use half for the System Image Backup and a half for storage. Now, creating the system image backup on the old disk triggers these two errors. Here, the problem was that the old drive still had those two partitions ( EFI System Partition and Recovery Partition) from the previous Windows.

In this scenario, to fix the issue, open Disk Management and delete those two partitions. Alternatively, you can use DiskPart to delete the partitions. Once deleted, restart your computer and try the system image backup again – the operation should complete without these errors.

Read: System Image Backup fails with error codes 0x807800C5 and 0x80070020.

3] Temporarily disable your security software

You may temporarily disable your security software and then run System Restore and see if that helps you.

4] Execute the operation in Clean Boot State

A Clean Boot is performed to start Windows by using a minimal set of drivers and startup programs. This helps eliminate software conflicts. In a clean boot state, you can see if the operation completes successfully.

5] Use third-party imaging software

If neither of the above solutions worked, you can use any of the 3rd party Imaging, Backup, and Recovery Software for Windows 10 to create the system image backup.

Hope this helps!

Related posts:

• System Image Backup fails with error codes 0x807800C5 and 0x8078004F.
• Volume Shadow Copy Service operation failed (0x807800A1), The writer experienced a transient error (0x800423F3).

Related posts

• Noocani ma taageerayo noocaan qaabka faylka ah, 0xC03A0005

• Cilad 0x80070013 ee Soo Celinta Nidaamka, Kaabta ama Hagaajinta Cusboonaysiinta Windows

• Kaabta Sawirka Nidaamka waa guuldareystay; Khaladaadka 0x807800C5, 0xC03A0005

• Kaabta Sawirka Nidaamka waa fashilmay, Khaladaadka 0x807800C5 iyo 0x8078004F

• Hagaaji koodka khaladka kaabta ee Windows 0x8078012D, Hawlgalka kaydinta ayaa fashilmay

• Hagaaji Windows 10 Cusbooneysii Qaladka Rakiba 0x8007042B - 0x2000D

• Codsigu ma heli karo Scanner - WIA_ERROR_OFFLINE, 0x80210005

• Kaabta Sawirka Systemku wuu guuldarraystay: Koodhadhka khaladka ah 0x807800C5, 0x80070020

• Cilada kaabta Windows 0x800700E1, Hawlgalku ma dhamaystirmin

• Hagaaji qaladka Codsiga 0xc0150004 gudaha Windows 11/10

• Darawalku waxa uu ku ogaaday cilad darawalka gudaha DeviceVBoxNetLwf

• Hagaaji Smart Check way dhaaftay, DST Gaaban Cilad ku fashilantay kombayutarka HP

• Hagaaji qaladka Runtime ee Logitech Setpoint Windows 10

• Ku rakib Realtek HD Audio Driver Failure, Cilad OxC0000374 Windows 10

• Hagaaji kaydku waa qaab aan la garanayn ama khalad dhaawacmay

• Dejintu way awoodi wayday inay ku abuurto khalad qaybta qaybta cusub ee Windows 10

• Khaladka 2738, Ma geli karo wakhtiga runtime VBScript ee ficilka gaarka ah

• Cilada adeegga ciyaaraha 0x80073D26, 0x8007139F ama 0x00000001

• Hagaaji Bdeunlock.exe Sawirka Xun, Khaladka Nidaamka ama Aan ka jawaabin khaladaadka

• MBR2GPT waxay ku guuldarraysatay inay awood u siiso kaydinta/soo celinta mudnaanta Windows 10