Qaar ka mid ah isticmaalayaasha Windows 10 ayaa sheegay inaysan awoodin inay qaabeeyaan Hard Drive^(Drives) -kooda fariinta khaladkuna waxay tiraahdaa, " Waxay ku guuldareysatay in la qaabeeyo qaybta la xushay, Khaladka 0x8004242d ^{(Failed to format the selected partition, Error 0x8004242d)}". Waxa kale oo aad arki kartaa 0x80070057 sida koodka qaladka ee la socda. Maqaalkan, waxaan ku hagaajin doonaa qaladkan iyadoo la kaashanayo qaar ka mid ah xalalka fudud.

Ku guuldareystay in la qaabeeyo qaybta la doortay, Khaladka 0x8004242d^{(Error 0x8004242d)}

Waxaa jiri kara sababo badan oo ka dambeeya dhibaatadan. Sida OS-gaagu waa mid aan la socon karin kantaroolaha kaydinta ballaaran ama darawalka, arrinta ku jirta fiilada xogta ama qalab kasta oo kale, iwm. Si kastaba ha ahaatee, waxaan dooneynaa inaan daboolno xal kasta oo suurtagal ah in qaladkan.

Kahor intaadan hore u socon, iska hubi inaad hubiso in Cable-kaagu SATA^{(SATA Cable)} uu si fiican ugu xidhan yahay. Haddii ay dabacsan tahay adkee oo hubi in arrintu go'an tahay. Haddii kale, sii wad akhrinta.

Kuwani waa waxyaabaha aad samayn karto si aad u hagaajiso Ku guuldareystay in la qaabeeyo qaybta la doortay, Khaladka 0x8004242d^{(Failed to format the selected partition, Error 0x8004242d)} .

1. Isticmaal DISKPART
2. Orod CHKDSK
3. Tirtir dhammaan qaybaha
4. Dami Taageerada Bootka ee UEFI

Aynu si faahfaahsan uga hadalno iyaga.

1] Isticmaal DISKPART

Xalka ugu horreeya wuxuu kaa rabaa inaad isticmaasho  Dispkpart.exe  si aad u nadiifiso saxanka ka hor inta aanad qaabeynin Hard Drives . Markaa ka bilow Warbaahinta Rakibaadda^{( boot from the Installation Media)} oo ka fur  Command Prompt  oo ka socda  Xulashooyinka Sare. ^{(Advanced Options. )}

Ku qor amarrada soo socda oo ku dhufo geli

diskpart

list disk

Tani waxay ku tusi doontaa liiska dhammaan darawallada kombuyuutarku leeyahay. Waxaad eegi kartaa cabbirkooda si aad u ogaato midka dhibka keenaya. Hadda, adeegso amarka soo socda si aad u doorato diskkaas gaarka ah.

sel disk <disk-number>

Xusuusin: Ku beddel <disk-number> lambarka saxanka aad isku dayayso inaad hagaajiso.

Samee amarka soo socda si aad u xaqiijiso inaad dooratay saxanka saxda ah.

det disk

Marka, aad hubiso in disk-ga aad dooratay uu sax yahay oo nadiifintiisa aysan wax dhibaato ah geysan doonin, socodsii amarka soo socda.

clean all

Xusuusin: Tani waxay tirtiri doontaa dhammaan xogtaada. Markaa taas ka digtoonow.

Ugu dambeyntii, adeegso amarka soo socda si aad uga baxdo DISKPART .

exit

Waxaan rajeyneynaa, tani waxay kuu hagaajin doontaa qaladka adiga.

la xidhiidha: ^{(Related: )}Daaqadaha ma qaabayn karayn qayb saxanka, Error Code 0x80070057.^{(Windows could not format a partition on disk, Error Code 0x80070057.)}

2] Orod CHKDSK

Dhibaatadu waxay noqon kartaa sababtoo ah qaybta xun ee darawalkaaga adag. Markaa, billow  Command Prompt  ka dib markaad kumbuyuutarka ka soo dejiso Rakibaadda Warbaahinta^{(Installation Media)} oo socodsii amarkan soo socda.

chkdsk c: /r

Waxay ku weydiin doontaa inaad xaqiijiso, markaa, ku dhufo " Y " si aad taas u sameyso.

Amarku ha shaqeeyo oo qaladka ha hagaajiyo.

3] Tirtir dhammaan qaybaha

Sababta ugu badan ee qaladkan waa Diiwaanka Bootka Master-ka oo xumaaday. ^{(Master Boot Record. )}Habka ugu fudud ee tan lagu hagaajin karo waa in la tirtiro dhammaan qaybaha^{(deleting all partitions)} .

Si kastaba ha noqotee, ka hor intaadan tan samayn, hubi inaad abuurto Sawirka Kaabta System^{(create a System Backup Image)} .

la xidhiidha^(Related) : Maanu qaabayn kari waynay qaybta la doortay - Khaladka 0x80070057^{(We couldn’t format the selected partition – Error 0x80070057)}

4] Dami Taageerada Bootka ee UEFI

Dhibaatadu waxay noqon kartaa sababtoo ah isku dhac u dhexeeya  UEFI  iyo  BIOS. Markaa, haddii aad la kulanto ciladan isku day inaad joojiso Taageerada Bootka ee UEFI^{(disabling UEFI Boot Support)} si aad u hagaajiso. Waxaad raaci kartaa tillaabooyinka la siiyey si aad sidaas oo kale u samayso.

1. Kumbuyuutarkaaga dib u bilow oo gal BIOS^{(boot into BIOS)} .
2. Tag Menu Bootka.^{(Boot Menu.)}
3. Dami  Boot Sugan^{(Secure Boot.)}

Hadda, kaydi beddelka oo hubi haddii ay xallinayso arrinta.

Waxaan rajeyneynaa, inaad awood u leedahay inaad hagaajiso qaladka qaybta adoo kaashanaya xalalkan.

Failed to format selected partition, Error 0x8004242d

Some Windows 10 users reported that they are unable to format their Hard Drives and the error messаge says, “Failed to format the selected partition, Error 0x8004242d“. You could also see 0x80070057 as the accompanying error code instead. In this article, we are going to fix this error with the help of some simple solutions.

Failed to format the selected partition, Error 0x8004242d

There can be many reasons behind this problem. Such as your OS is incompatible with the mass storage controller or the driver, issue in data cable or any other hardware, etc. However, we are going to cover every possible solution to this error.

Before moving forward, make sure to check if your SATA Cable is connected perfectly. If it’s loose tighten it and check if the issue is fixed. If not, continue reading.

These are the things you can do to fix Failed to format the selected partition, Error 0x8004242d.

1. Use DISKPART
2. Run CHKDSK
3. Delete all the partitions
4. Disable UEFI Boot Support

Let us talk about them in detail.

1] Use DISKPART

The first solution requires you to use Dispkpart.exe to clean the disk before formatting Hard Drives. So boot from the Installation Media and open Command Prompt from Advanced Options. 

Type the following commands and hit enter

diskpart

list disk

This will show you the list of all the drivers your computer has. You can look at their respective sizes to know the one causing the trouble. Now, use the following command to select that particular disk.

sel disk <disk-number>

Note: Replace the <disk-number> with the number of the disk that you are trying to fix.

Run the following command to confirm that you have selected the correct disk.

det disk

Once, you are sure that the disk you have selected is correct and cleaning it will cause no harm, run the following command.

clean all

Note: This will delete all your data. So, be aware of that.

Finally, use the following command to exit DISKPART.

exit

Hopefully, this will fix the error for you.

Related: Windows could not format a partition on disk, Error Code 0x80070057.

2] Run CHKDSK

The problem can be because of a bad sector in your hard drive. So, launch Command Prompt after booting the computer from Installation Media and run the following command.

chkdsk c: /r

It will ask you to confirm, so, hit “Y” to do that.

Let the command run and fix the error.

3] Delete all the partitions

The most common reason for this error is the corrupted Master Boot Record. The easiest way to fix this is by deleting all partitions.

However, before doing this, make sure to create a System Backup Image.

Related: We couldn’t format the selected partition – Error 0x80070057

4] Disable UEFI Boot Support

The problem can be because of a conflict between UEFI and BIOS. So, if you facing this error try disabling UEFI Boot Support to fix it. You can follow the given steps to do the same.

1. Restart your computer and boot into BIOS.
2. Go to the Boot Menu.
3. Disable Secure Boot.

Now, save the alteration and check if it fixes the issue.

Hopefully, you are able to fix the partition error with the help of these solutions.

Related posts

• Abuur Cusub, Cabbir, Kordhi Qaybta adoo isticmaalaya Qalabka Maareynta Disk

• AOMEI Partition Assistant Standard Review & Soodejin bilaash ah

• Sida loo tirtiro qaybta Volume ama Drive Partition gudaha Windows 11/10

• Tirtir doorashada mugga oo cirroobay: Ma tirtiri karo Qaybta Disk

• Sida loo xaliyo qaladka qoraalka Disk ee Steam gudaha Windows 11/10

• Hard adag oo dibadda ah lama heli karo? Samee ama maamul Hubinta Disk adiga oo isticmaalaya CMD

• Wadaadka USB kama soo baxayo PC-kan laakiin wuxuu ka dhex muuqdaa Maamulka Disk-ga

• Fix Ma jiraan saxanno go'an oo muujinaya qaladka Diskpart

• Ka saar barnaamijyada Windows-ka ee aan la rabin, abka, faylalka, sifooyinka

• Sida loo xaliyo dhibaatada isku dhaca Saxeexa Disk ee gudaha Windows 11/10

• Hagaaji qaladka Disk-ka ee Steam Corrupt Windows 10

• USB Disk Ejector wuxuu kuu ogolaanayaa inaad si dhakhso leh uga saarto qalabka USB Windows 10

• 6 Software Partition Disk Free loogu talagalay Windows 10

• Waa maxay sababta uu Hard Disk-gaygu u fashilmay ama u shil galay si degdeg ah & sabab la'aan?

• Sida si ammaan ah oo badbaado leh loogu tuuro Kumbiyuutarradii hore

• Hagaaji qaladka NTOSKRNL.exe iyo CPU-ga sareeya, dhibaatada isticmaalka Disk-ga

• Hagaaji "Kama Akhrin Karo Isha File ama Disk" Khaladka

• Sida loo qaybiyo Hard Disk-ga gudaha Windows 11

• Dib u eegista CCleaner 5: Ka saar faylalka junk PC oo nadiifi meel saxanka ah

• Khabiir Qaybta Disk-ga Macrorit: Software Management Disk Free