Fariinta qaladka Magaca faylka, magaca tusaha, ama calaamada mugga syntax waa^{(The filename, directory name, or volume label syntax is incorrect)} qalad 0x8007007B waa mid ka mid ah khaladaadka System Soo celinta ee^{(System Restore)} laga yaabo inaad la kulanto markaad isku daydo inaad ku sameyso hawlgalka System Soo celinta^{(System Restore)} qalabkaaga Windows 10. Ciladani waxa ay soo baxdaa marka aad ka baxayso System Restore applet ka dib marka ay tahay in aad gacanta ku samaysatay barta soo celinta^{(manually created a restore point)} . Maqaalkan, waxaan ku aqoonsan doonaa sababta ka dhalan karta qaladkan iyo sidoo kale bixinta xalka ugu habboon ee aad isku dayi karto inaad si guul leh u xalliso arrinta.

Marka aad la kulanto arrintan. waxaad heli doontaa fariinta khaladka ah ee dhamaystiran ee soo socota;

System Restore
There was an unexpected error:
The filename, directory name, or volume label syntax is incorrect.
(0x8007007B)
Please close System Restore and try again.

Magaca faylka, magaca hagaha, ama qoraalka mugga sumadda waa khalad (0x8007007B)

Ciladani waxay dhacdaa sababtoo ah nidaamka ayaa loo dejiyay inuu dhigo barta soo celinta ee waddo ama goob aan sax ahayn.

Saxan u shaqaynaya barta soo celinta waa inuu buuxiyaa shuruudaha hoose.

• Wadaadka la doortay waa inuu ahaadaa 1 gigabyte (GB) ama ka weyn.
• Wadaad kasta oo awood u leh Ilaalinta Nidaamka^{(System Protection)} waa in uu lahaadaa ugu yaraan 300 megabyte (MB) oo meel adag oo bilaash ah.

Meesha dib u soo celinta waxay qaadan kartaa ilaa 15% wadarta guud ee bannaan ee laga heli karo saxan kasta, laakiin waxay tirtiri doontaa dhibcihii soo celinta hore haddii ay lagama maarmaan noqoto si boos loogu helo barta soo celinta cusub.

Markaa, haddii ay ku soo wajahdo arrintan, si aad u xalliso, waxaad u baahan tahay inaad dejiso Barta Soo celinta^{(Restore Point)} waddo sax ah.

Waa kan sida:

• Riix Windows key + R si aad ugu yeerto Run dialog.
• In sanduuqa Run Run, ku qor sysdm.cploo ku dhufo Gelida^(Enter) si aad u furto daaqada System Properties .
• Daaqadda Guryaha  Nidaamka^{(System Properties)}  , dhagsii   tabka Ilaalinta Nidaamka .^{(System Protection)}
• Hoosta  ilaalinta goobaha^{(Protection settings)} , calaamad ka saar meel kasta oo aan ansax ahayn ama nuqul ka mid ah (haddii lagu rakibay darawallo badan, halkan ayaa lagu qori doonaa).
• Meesha aan ansax ahayn waxay u ekaan kartaa gelid la mid ah gelitaan kale, laakiin aan lahayn astaanta Windows .
• Guji si aad u hubiso C:darawalka sumadda Windows.
• Guji Codso^(Apply) >  OK .

Waxaad hadda abuuri kartaa barta dib u soo celinta oo arag haddii qaladku weli dhaco.

Haddii arrinta la xalliyo, Drives-ka kale ee la heli karo waa la dooran karaa haddii ay u muuqdaan inay sax yihiin (oo wata summada garaafka).

Haddii aad damacsan tahay inaad ilaaliso dhammaan darawallada la heli karo, waxaa lagugula talinayaa inaad ku darto hal disk markiiba oo aad tijaabiso System Restore ilaa aad ka go'aamiso mid ka mid ah kuwan liiska ku jira ee Available Drives ah.

Akhri^(Read) : Soo celinta Nidaamka Ma shaqaynayo, fashilantay ama si guul leh uguma dhammayn^{(System Restore not working, failed or did not complete successfully)} Windows 10.

Waxaan rajeynayaa inaad qoraalkan ku caawin doonto!

Filename, directory name or volume label syntax is incorrect, 0x8007007B

The error message The filename, directory name, or volume label syntax is incorrect with error code 0x8007007B is one of the System Restore errors you might encounter when you attempt to carry out a System Restore operation on your Windows 10 device. This error pops up when exiting the System Restore applet after you must have manually created a restore point. In this post, we will identify the potential cause of this error as well as provide the most suitable solution you can try to successfully resolve the issue.

When you encounter this issue. you’ll receive the following full error message;

System Restore
There was an unexpected error:
The filename, directory name, or volume label syntax is incorrect.
(0x8007007B)
Please close System Restore and try again.

The filename, directory name, or volume label syntax is incorrect (0x8007007B)

This error occurs because the system is set to place a restore point to an invalid path or location.

A disk that is valid for a restore point must meet the requirements below.

• The drive selected must be of capacity 1 gigabyte (GB) or greater.
• Each drive with System Protection enabled must have at least 300 megabytes (MB) of free hard drive space.

A restore point might take up as much as 15% of the total available space available on each disk, but it will delete old restore points if it is necessary in order to make room for the new restore point.

So, if you’re faced with this issue, to resolve it, you need to set the Restore Point to a valid path.

Here’s how:

• Press Windows key + R to invoke the Run dialog.
• In the Run dialog box, type sysdm.cpl and hit Enter to open System Properties window.
• In the System Properties window, click the System Protection tab.
• Under Protection settings, uncheck any invalid or duplicate location (if you have multiple drives installed, they’ll be listed here).
• An invalid location may appear as an entry identical to another entry, but without the Windows logo.
• Click to check the C: drive with the Windows logo.
• Click Apply > OK.

You can now create a restore point and see if the error still occurs.

If the issue is resolved, other Available Drives can be selected if they appear to be valid (with a graphic icon).

If you intend to protect all Available Drives, it is recommended that you add only one disk at a time and test System Restore until you have determined which of the listed Available Drives is not valid.

Read: System Restore not working, failed or did not complete successfully in Windows 10.

Hope you find this post helpful!

Related posts

• Habee Nidaamka Soo Celinta Booska oo deji inta u dhexaysa Soo celinta Nidaamka

• Fix System Restore ma dhamaystirmin, koodka cilada 0x80070005

• Halbeeggu waa khalad, Khaladka 0x80070057 ee Windows 11/10

• Samee barta soo celinta nidaamka adoo isticmaalaya Command Prompt ama PowerShell

• Qaybta Adeegga Koobiga Mugga waxay la kulantay cilad 0x80042302

• Hagaaji qaladka soo celinta nidaamka 0x8007007e ee Windows 11/10

• Sida loo soo ceshado faylasha goobta soo celinta nidaamka gudaha Windows 10

• Dhibcaha Soo Celinta Nidaamka waa la tirtiray ama waa la waayayaa gudaha Windows 11/10

• 2 siyaabood oo awood loo siiyo System Restore in Windows 10

• Hagaaji Koodhka Qaladka 0x80070017 inta lagu jiro Rakibaadda, Cusboonaysiinta, Soo celinta Nidaamka

• Sida loo sameeyo shortcut soo celinta System in Windows 10

• Soo celinta Nidaamka si guul leh uma dhammaystirmin, Koodhka Qaladka 0x80071a90

• Soo celinta System-ka waxaa curyaamiyay maamulaha nidaamkaaga ama wuu cirroobay

• Xagee lagu kaydiyaa dhibcaha Soo celinta Nidaamka? Sidee loo arkaa Dhibcaha Soo Celinta?

• Soo celinta Nidaamka ayaa ku guuldareystay inuu beddelo faylka, Code Error Code 0x80070780

• Sida loo isticmaalo System Restore on Windows 10

• Rakibaadaha Modules Windows ee ku taxan Barta Soo Celinta Nidaamku wuu fashilmay

• Fix System Restore si guul leh uma dhamaan

• Sida loo habeeyo System Restore gudaha Windows 10

• Dhibcaha soo celinta nidaamka ayaa ka maqan Windows?