Waxaa jira sababo badan oo laga yaabo inaad rabto inaad ka abuurto qayb ka mid ah booska bilaashka ah ee darawalkaaga Windows . Sababta ugu badan ayaa ah in la rakibo nidaamka hawlgalka ka duwan (sida Linux ) si aad labajibbaar ugu dhejin karto PC-gaaga.

Sababaha kale waxaa ka mid noqon kara abuurista darawal adag oo cusub oo ka duwan C: wadista kaas oo u heellan xogta kaliya. Ama waxaa laga yaabaa inaad rabto inaad abuurto qayb sir ah oo aan qofna geli karin la'aanteed furayaasha amniga ee saxda ah.

Iyadoo aan loo eegin sababta, waa inaadan ku boodin habka isla markiiba. Waxaa jira dhawr waxyaalood oo ay tahay inaad samayso si aad u hubiso inaad si sax ah u cabbirtay qaybta cusub, iyo inaad leedahay qorshe dib u dhac haddii arrimuhu xumaadaan.

Samee Windows 10 kaabta

Haddii aad rabto inaad abuurto qayb la mid ah darawalada adag halka aad aasaasiga ah Windows 10 nidaamka hawlgalka lagu rakibay, waxaad u baahan tahay inaad si badbaado leh u sameyso.

Talaabadaada ugu horeysa waa inaad had iyo jeer noqotaa inaad qaadato sawirka kaydinta ee darawalkaaga adag. Mahadsanid tani waa hab aad u fudud in la bilaabo, laakiin waxay qaadataa wakhti in la dhammaystiro. Meel^(Set) dhig ilaa saacad si aad u dhammayso hawshan.

1. Si aad u bilowdo kaydinta Windows , fur Control Panel oo dooro Backup and Restore (Windows 7) . Ka dooro samee sawirka nidaamka^{(Create a system image)} ka menu-ka bidix.

2. Tani waxay furi doontaa daaqad cusub halkaas oo aad ka dooran kartaa meesha aad rabto in aad kaydiso gurmad. Maskaxda ku hay in kaydinta kaydkaagu ay u baahan tahay inay haysato meel bannaan oo la mid ah inta boos ee aad hadda ku isticmaalayso kaaga Windows 10 PC. Dooro Xiga^(Next) si aad u sii wadato.

3. Habka kaydku wuxuu qaadan doonaa meel kasta laga bilaabo 15 daqiiqo ilaa saacad taas oo ku xidhan inta uu le'eg yahay isticmaalka darawalkaagu. Marka la dhammeeyo, darawal cusub oo la yiraahdo WindowsImageBackup ayaa ka soo muuqan doona meesha aad dooratay inaad kaydiso kaydkaaga.

Waxaa laga yaabaa inaad dareento inaadan arki karin waxa ku jira hagahan. Hadday arintu sidaas tahay, dooro Start , nooca Explorer.exe , midigta guji Explorer.exe Run Command oo dooro Maamule ahaan Run^{(Run as administrator)} .

Hadda waxaad u sii socon kartaa galka kaydka oo aad arki kartaa adiga Windows 10 kaabta ayaa si guul leh u dhammaatay. Hadda waxaad diyaar u tahay inaad ka qoondayso meel kombuyuutar oo bilaash ah qaybtaada ugu weyn una wareeji mid kale.

Xusuusin^(Note) : Haddii ay wax qaldamaan oo aad u baahan tahay inaad dib u soo kabsato Windows 10 , waxaad sidaas ku samayn kartaa adigoo furaya Control Panel , oo aad doorato Backup and Restore (Windows 7) . Dooro Xulo kayd kale si aad u soo celiso faylasha^{(Select another backup to restore files from)} si aad u doorato kaydkaaga una soo celiso nidaamkaaga.

Akhri tilmaantayada faahfaahsan ee ku saabsan sida loo abuuro Windows 10 sawirka nidaamka^{(how to create a Windows 10 system image backup)} .

U qoondee meel bannaan^{(Allocate Free Space)} si aad u abuurto qayb

Si aad u abuurto qayb ka mid ah darawalkaaga meel bannaan, waxaad u baahan tahay inaad ogaato inta boos ee bilaashka ah ee aad u tudhi karto. Haddii aad ku shaqeyneyso Windows 10 hal waddo oo adag halkaas oo kaliya hal qayb oo muhiim ah ayaa loo qoondeeyay Windows 10 OS iyo dhammaan faylasha xogta, waxaad u baahan doontaa inaad hubiso inaad weli boos badan ka haysato ka dib markaad hoos u dhigto qaybtaas.

Si aad tan u hubiso, fur Faylka Explorer^{(File Explorer)} , ku dhufo midigta ku dhufo nidaamka waditaanka guud (tusaale ahaan, taasi waa C :), oo dooro Properties .

Halkan, waxaad ku arki doontaa labadaba boos la isticmaalay iyo meel banaan ah. 

Haddii aad rajaynayso in aad laba-dual ku dhejiso PC-gaaga OS cusub sida Ubuntu Linux , hubi in meesha bannaan ay qaadi karto shuruudaha ugu yar ee OS-ka cusub.

Tusaale ahaan, Ubuntu wuxuu u baahan yahay ugu yaraan 25 GB. Si aad boos ugaga baxdo xogta, waxaad u baahan doontaa inaad u qoondayso ku dhawaad ​​100 GB qaybta Ubuntu OS .

Markaad xisaabiso inta aad rabto inaad hoos u dhigto qaybta ugu weyn si aad boos uga dhigto kan cusub, waxaad diyaar u tahay inaad abuurto qaybtaada cusub.

1. Dooro menu-ka Start oo ku qor Maamulka^{(Administrative)} . Dooro Appka Aaladaha Maamulka Daaqadaha^{(Windows Administrative Tools App)} . Marka uu furmo daaqada Aaladaha^(Tools) maamulka , dooro Maaraynta Kombiyuutarka^{(Computer Management)} . Daaqadda Maamulka Kombiyuutarka^{(Computer Management)} , ka dooro Maareynta Disk^{(Disk Management)} ka menu-ka bidix. Halkan, waxaad arki doontaa C: qaybta wadista iyo cabbirkeeda guud.

2. Midig ku dhufo C: partition ka oo dooro shrink Volume liiska hoos u dhaca.

3. Daaqad ayaa soo baxaysa halkaas oo aad geli karto qadarka booska si aad u yarayso qaybta aad dooratay. Gudaha goobta Geli qadarka booska si aad u yaraato MB^{(Enter the amount of space to shrink in MB)} , waxaad u baahan doontaa inaad geliso cabbirka qaybta cusub ee aad rabto. Tusaale ahaan, haddii aad rabto in qaybta cusubi ay noqoto 200 GB, waxaad ku qori doontaa 200000 . Dooro Yarayso^(Shrink) markaad dhammayso.

4. Marka uu dhammeeyo hawlgalka Iskudhicida^(Shrink) , waxaad arki doontaa qayb cusub oo ku taxan sida " Aan La qoondayn^{(Unallocated)} ".

Hadda oo aad meel bannaan ka qoondaysay qayb ilaa qayb kale, waxaad diyaar u tahay inaad u isticmaasho ujeeddo kasta oo aad u rabto.

Isticmaalka Qaybtaada Cusub ee Loo Qoondeeyey

Meeshan Aan La qoondayn waxaad u maarayn doontaa si kala duwan iyadoo ku xidhan waxaad rabto inaad u isticmaasho. Haddii aad xiisaynayso kaliya inaad u isticmaasho sidii meel cusub oo kaydinta xogta, kaliya midig-guji qaybta oo dooro Mugga Cusub ee Fudud^{(New Simple Volume)} .

Waxaad tan ka dhigi kartaa qayb la dheereeyey si aad u kaydiso xogta.

Haddii aad xiisaynayso in aad u isticmaasho si aad laba-dual booting kaaga u samayso windows 10 PC oo wata Linux OS sida Ubuntu , waxaad ku dhex mari kartaa hagahayaga ku saabsan labada booting Windows 10 la Ubuntu^{(dual booting Windows 10 with Ubuntu)} . Ama raac hagahayada kabaha labajibbaaran ee Windows 10 oo leh Mint^{(dual boot Windows 10 with Mint)} .

Waxaad sidoo kale samayn kartaa labadaba. Haddii aad abuurto nidaam boot-dual ah adiga oo Linux ku rakibaya qayb cusub oo loo qoondeeyay, waxaad ku celin kartaa habka kor ku xusan si aad u abuurto qayb saddexaad oo u adeegi karta kaydinta xogta la wadaago ee labada nidaam.

Sida aad u go'aansato inaad u isticmaasho qaybtaada cusub ee la qoondeeyay gabi ahaanba adiga ayay kugu xidhan tahay.

How To Create a Partition From Windows Drive Free Space

There are a lot of reaѕons you might want to create a partition from free ѕpaсe on your Windows drive. The most common reason is usuаlly to install a different operating system (like Linux) so you can dual boot your РC.

Other reasons may include creating a new hard drive separate from your C: drive that’s dedicated to only data. Or you might want to create an encrypted partition that no one can access without the correct security keys.

Regardless of the reason, you shouldn’t just jump into the process immediately. There are a few things you should do to make sure you’ve sized the new partition correctly, and that you have a fall-back plan if things go bad.

Create a Windows 10 Backup

If you’re about to create a partition with the same hard drive where your primary Windows 10 operating system is installed, you need to do it safely.

Your first step should always be to take a backup image of your hard drive. Thankfully this is a very easy process to initiate, but it does take some time to complete. Set aside about an hour to finish this process.

1. To start your Windows backup, open the Control Panel and select Backup and Restore (Windows 7). Select Create a system image from the left menu.

2. This will open a new window where you can select where you want to store the backup. Keep in mind that your backup storage needs to have available space that’s as large as the amount of space you’re currently using on your Windows 10 PC. Select Next to continue.

3. The backup process will take anywhere from 15 minutes to an hour depending how large your drive usage is. When it’s done, a new drive called WindowsImageBackup will appear where you’ve selected to store your backup.

You may notice that you can’t view the contents of this directory. If this is the case, select Start, type Explorer.exe, right click on Explorer.exe Run command and select Run as administrator.

Now you can navigate to the backup folder and see that your Windows 10 backup completed successfully. You’re now ready to allocate free PC space from your main partition to another one.

Note: If something goes wrong and you do need to recover your Windows 10, you can do so by opening the Control Panel, and selecting Backup and Restore (Windows 7). Choose Select another backup to restore files from to select your backup and restore your system.

Read our detailed guide on how to create a Windows 10 system image backup.

Allocate Free Space To Create a Partition

To create a partition from your drive free space, you need to know how much free space you can spare. If you’re running Windows 10 on a single hard drive where only one main partition is allocated for the Windows 10 OS and all data files, you’ll need to make sure you still have plenty of space left over after you shrink that partition.

To check this, open File Explorer, right-click the main system drive (in this example, that’s C:), and select Properties.

Here, you’ll see both Used space and Free space. 

If you’re hoping to dual boot your PC with a new OS like Ubuntu Linux, make sure the free space can accommodate the minimum requirements of the new OS.

For example, Ubuntu requires at least 25 GB. To leave room for data, you’ll want to allocate around 100 GB for a Ubuntu OS partition.

Once you’ve calculated how much you want to shrink the main partition to make space for the new one, you’re ready to create your new partition.

1. Select the Start menu and type Administrative. Select the Windows Administrative Tools App. Once the Administrative Tools window opens, select Computer Management. In the Computer Management window, select Disk Management from the left menu. Here, you’ll see the C: drive partition and its overall size.

2. Right-click the C: partition and select Shrink Volume from the dropdown list.

3. A window will pop-up where you can enter the amount of space to shrink the partition you selected. In the field for Enter the amount of space to shrink in MB, you’ll need to enter the size of the new partition you want. For example, if you want the new partition to be 200 GB, you’ll type 200000. Select Shrink when you’re done.

4. Once the Shrink operation is completed, you’ll see a new partition listed as “Unallocated”.

Now that you’ve allocated free space from one partition to another, you’re ready to use it for whatever purpose you wanted it for.

Using Your Newly Allocated Partition

You’ll handle this Unallocated space differently depending what you want to use it for. If you’re only interested in using it as new storage space for data, just right-click the partition and select New Simple Volume.

You can make this an extended partition to store data.

If you’re interested in using it to dual boot your windows 10 PC with a Linux OS like Ubuntu, you can walk through our guide on dual booting Windows 10 with Ubuntu. Or follow our guide to dual boot Windows 10 with Mint.

You can also do both. If you create a dual boot system by installing Linux in a newly allocated partition, you could repeat the process above to create a third partition that can serve as shared data storage for both systems.

How you decide to use your newly allocated partition is completely up to you.

Related posts

• Software-ka ugu fiican ee Hard Drive-ka ee bilaashka ah ee loogu talagalay Windows 10

• Panda Antivirus-ka bilaashka ah ee loogu talagalay Windows 10

• Software-ka ugu Wacan ee Codka iyo Equalizer-ka bilaashka ah ee Windows 10 PC

• Hal-abuurka ugu fiican ee PDF Stamp Free ee Windows 10

• USB Disk Ejector wuxuu kuu ogolaanayaa inaad si dhakhso leh uga saarto qalabka USB Windows 10

• Software-ka ugu fiican ee sawir-qaadista bilaashka ah ee Windows 10 si uu kuugu soo saaro farshaxanka adiga kugu jira

• Sida loo koobi karo ama loo xidho USB Drive gudaha Windows 10

• IsMyHdOK waa software hubinta caafimaadka Hard Disk-ga oo bilaash ah Windows 10

• Software-ka ugu Fiican ee Maamulka Cusbitaalka Bilaashka ah ee Windows 10

• Tifaftiraha SynWrite: Qoraal bilaash ah & Tifaftiraha Koodhka Isha ee Windows 10

• Software-ka ugu Fiican ee Daawaha Faylka DBF ee bilaashka ah ee Windows 10

• Software-ka ugu Wanaagsan ee Fog-fog ee bilaashka ah ee Windows 10

• Gabayada ugu Fiican ee Bilaashka ah iyo Xigashooyinka Qorista ee Windows 10

• Ugu Fiican ee Dufcada Sawirka Bilaashka ah ee Taariikhda Stamper software ee Windows 10

• Panda VPN bilaash ah Windows 10 dib u eegista - Ma mudan tahay in la isticmaalo?

• Ku dar ama ka saar tab ReadyBoost gudaha Guryaha Drive gudaha Windows 10

• Sida loo tirtiro qayb ka mid ah Volume ama Drive Partition gudaha Windows 10

• USB Flash Drive wuxuu muujinayaa 0 Bytes gudaha Windows 10

• Sida loo arko Cabbirrada Barnaamijka iyo App-ka gudaha Windows 10

• Software-ka ugu fiican ee PDF editing ee bilaashka ah ee Windows 10