Waxaan dhawaan iibsaday Actiontec MoCA 2.0 Ethernet ilaa Coax adabtarada^{(Actiontec MoCA 2.0 Ethernet to Coax adapter)} sababtoo ah gurigayga oo dhan wuxuu ku xidhan yahay coax waxaanan dhawaan u cusboonaysiiyay FIOS Quantum Gateway kaas oo sidoo kale taageera MoCA 2.0 .

Isticmaalka adabtarada, waxaan kordhin karaa heerka wareejinta xogta deegaanka ee LAN ilaa meel ku dhow 400 Mbps ama 50 MB/s marka la barbar dhigo xawaaraha hore ee aan ku heli jiray MoCA 1.1 , kaas oo ahaa agagaarka 100 Mbps ama 12.5 MB/s .

Waxaan sidoo kale dhawaan ku qoray boggayga kale ee sharxaya sida kor loogu qaadayo Kadinka Quantum-ka cusub^{(upgrading to the new Quantum Gateway)} ay tahay tallaabo wanaagsan haddii aad FIOS u leedahay internetkaaga^(Internet) .

Inkasta oo kani yahay adabtarada weyn iyo mid ka mid ah kuwa aadka u yar ee halkaa jooga si ay u taageeraan MoCA 2.0 , waxay sidoo kale leedahay arrimo qaarkood. Haddii aad akhrido faallooyinka Amazon , waa mid cajiib ah ama si joogta ah u dhacaya oo waa in dib loo bilaabo.

Nasiib wanaag, Actiontec ayaa tan ugu sarreysa iyada oo leh cusbooneysiin cusub oo firmware ah. Nasiib darro, maan helin hal goob oo ii sheegi karta sida loo cusboonaysiiyo firmware-ga adabtarada! Ugu dambeyntii, waxaan la xiriiray wakiillada adeegga macaamiisha ee Actiontec oo aan bartay habka.

Maqaalkan, waxaan kugu socon doonaa habka isku xirka shabakada interneedka ee Actiontec ECB6200 adabtarada iyo cusboonaysiinta firmware-ka. Intaa waxaa dheer, waxaan sidoo kale ku siin doonaa isku xirka soo dejinta firmware-kii ugu dambeeyay ee ay i siiyeen. Habkani waxa laga yaabaa ama laga yaabaa inaanu ka shaqayn ECB6000 .

Kordhi ECB6200 Firmware

Si aad u bilowdo, waa inaad ka jartaa fiilada coax adabtarada. Markaad taas sameyso, horay u sii wad oo ku xidh hal cidhif oo fiilada Ethernet adabtarada ah iyo dhamaadka kale Windows PC.

Hadda kombuyutarkaaga Windows , waa inaan bedelnaa qaar ka mid ah shabakadaha shabakadaha si aad ugu xidhidhiyaha shabakada adabtarada. Si arrintan loo sameeyo, fur Control Panel oo guji Network and Sharing Center . Hubi inaad ka beddeshay aragtida Qaybta^(Category) una beddesho astaamo yar^(Small) ama mid weyn .^(Large)

Hadda horay u soco oo dhagsii Beddelka Adapter Settings^{(Change Adapter Settings)} ee ku yaal menu dhinaca bidixda ah.

Midig ku dhufo Ethernet ama Isku xirka Deegaanka^{( Local Area Connection)} oo dooro Guryaha^(Properties) .

Ka dooro Internet Protocol Version 4 (TCP/IPv4) liiska ka dibna dhagsii badhanka Guryaha^(Properties) .

Horey u soco oo dooro Isticmaal badhanka raadiyaha IP-ga ee soo socda^{( Use the following IP address)} oo ku qor lambarrada soo socda sida hoos ku cad. Ciwaanka IP-ga, waxaan doortay 192.168.144.5, laakiin waxaad dooran kartaa wax kasta lambarka ugu dambeeya ilaa iyo inta uusan ku dhammaanayn .30 ama .1.

Hubi^(Make) inaad dejiso albaabka hore ee 192.168.144.1 . Uma baahnid inaad wax lambar ah geliso server-yada DNS . Guji OK^{(Click OK)} ka dibna OK mar labaad si aad dib ugu noqoto Control Panel . Hadda fur browser-ka internetka oo ku qor ciwaanka IP-ga ee soo socda: 192.168.144.30 .

Haddii wax walba si sax ah loo habeeyey, waa inaad aragto bog internet Actiontec fudud oo leh macluumaad ku saabsan adaabta. Halka ay ka leedahay SW Version waa nooca firmware-ka hadda ee Adapter-ka Actiontec . Nuqulkii ugu dambeeyay ee qoraalkan waa 2.11.1.10.6200.1.

ecb_flashimage_2_11_1_10_6200_1

Waxaad kala soo bixi kartaa nuqulkii ugu dambeeyay ee flash ka linkiga kore. Tan waxaa si toos ah iigu soo dirtay Actiontec^(Actiontec) waxaanan sidoo kale hubiyay in aan iskaan karo anigoo isticmaalaya VirusTotal si aan u hubiyo inay nadiif tahay. Hadda dhagsii Cusboonaysiinta SW^{(SW Update)} oo dhagsii badhanka Browse si aad u doorato faylka BIN . Sida iska cad waa inaad furto waxa ku jira ka hor inta aanad isku dayin inaad soo rogto faylka.

Guji badhanka soo raritaanka^(Upload) oo waxay bilaabi doontaa soo dejinta. Waxaad arki doontaa boqolkiiba la soo galiyay oo marka ay gaadho 100%, waa inay tidhaahdaa La Sameeyay^(Done) oo Dib u bilaabay^(Rebooting) . Ogsoonow in aysan dhab ahaantii soo cusboonaysiin shaashadda markan. Waa inaad sugtaa hal daqiiqo ka dibna si fudud isku day inaad mar labaad dib u soo kiciso bogga shabakadda.

Aniga ahaan, waxaan ku qasbanahay inaan cusbooneysiiyo dhowr ka mid ah kuwan oo aan la kulmay dhowr arrimood. Marka hore, waxay mararka qaarkood ku xayirmi doontaa boqolkiiba qaar marka wax la soo gelinayo. Markii ugu horeysay ee aan isku dayay, waxay gaadhay 87% ka dibna halkaas ayaan fadhiistay. Ugu dambayntii, waan ka furay, dib baan u xidhay oo haddana isku dayay. Ugu dambayntii way shaqeysay.

Mid kale, casriyeynta ayaa si fiican u dhacday, laakiin markii aan ku soo celiyay meeshii aan kaga isticmaalay gurigayga, waxay si joogto ah u socon doontaa wareegga tamarta. Iftiinka korontadu wuu soo baxayaa, ka dib nalka coax ayaa shidmi doona ka dibna nalka coax ayaa dami doona qiyaastii laba ilbiriqsi ka dib. Iftiinka korantada ayaa markaa dami doona oo dib u shidmi lahaa ka dibna wax la mid ah iftiinka coax. Midkaas, waa inaan riixo oo aan hayaa badhanka dib u dejinta ilaa 10 ilbiriqsi ka dib markii aan ka jaray dhammaan fiilooyinka taasina waxay hagaajisay dhibaatada.

Haddii aad akhrinayso qoraalkan dhawr bilood ka dib taariikhda la qoray, hubi inaad si toos ah ula xiriirto 888-436-0657 ama buuxi foomkan taageerada farsamada ee khadka tooska ah^{(online technical support form)}  si aad u hesho iimayl ahaan laguugu soo diro nooca firmware-ka ugu dambeeyay. Haddii aad wax su'aalo ah qabtid, xor u noqo inaad faallo ka bixiso. Ku raaxayso!

How to Upgrade Actiontec ECB6200 Firmware

I recently purchased the Actiontec MoCA 2.0 Ethernet to Coax adapter because my entire house is wired for coax and I recently upgraded to the FIOS Quantum Gateway that also supports MoCA 2.0.

Using this adapter, I could increase the local data transfer rate on my LAN to somewhere around 400 Mbps or 50 MB/s as compared to the previous speed I was getting with MoCA 1.1, which was around 100 Mbps or 12.5 MB/s.

I also recently wrote a post on my other site explaining how upgrading to the new Quantum Gateway is a good move if you have FIOS for your Internet.

Even though this is a great adapter and one of the very few out there to support MoCA 2.0, it also has some issues. If you read the reviews on Amazon, it’s either fabulous or it drops frequently and has to be restarted.

Luckily, Actiontec has been on top of this with new firmware updates. Unfortunately, I could not find one site that could tell me how to update the firmware on the adapter! Finally, I got in touch with the customer service reps at Actiontec and learned the procedure.

In this article, I’m going to walk you through the process of connecting to the web interface on the Actiontec ECB6200 adapter and updating the firmware. In addition, I’ll also provide a download link for the latest firmware that they provided me. This procedure may or may not work on the ECB6000.

Upgrade ECB6200 Firmware

To get started, you have to disconnect the coax cable from the adapter. Once you do that, go ahead and plug one end of an Ethernet cable into the adapter and the other end into a Windows PC.

Now on your Windows PC, we have to change some network settings so that you can connect to the web interface on the adapter. To do this, open Control Panel and click on Network and Sharing Center. Make sure you change from Category view to Small or Large icons.

Now go ahead and click on Change Adapter Settings in the left hand side menu.

Right-click on Ethernet or Local Area Connection and choose Properties.

Select Internet Protocol Version 4 (TCP/IPv4) from the list and then click on the Properties button.

Go ahead and select the Use the following IP address radio button and type in the following numbers as shown below. For the IP address, I chose 192.168.144.5, but you can choose anything for the last  number as long as it does not end with .30 or .1.

Make sure to set the default gateway to 192.168.144.1. You do not have to enter any numbers for the DNS servers. Click OK and then OK again to get back to the Control Panel. Now open a web browser and type in the following IP address: 192.168.144.30.

If everything is configured properly, you should see a simple Actiontec webpage with info about the adapter. Where it says SW Version is the current firmware version for the Actiontec adapter. The latest version as of this writing is 2.11.1.10.6200.1.

ecb_flashimage_2_11_1_10_6200_1

You can download the latest flash version from the link above. This was sent directly to me by Actiontec and I also made sure to scan it using VirusTotal to make sure it was clean. Now click on SW Update and click the Browse button to select the .BIN file. You obviously have to unzip the contents first before trying to upload the file.

Click the Upload button and it will start uploading. You’ll see the percent uploaded and once it reaches 100%, it should say Done and Rebooting. Note that it doesn’t actually refresh the screen at this point. You should wait a minute or so and then simply try to refresh the webpage again.

For me, I had to update a couple of these and ran into a few issues. Firstly, it would sometimes get stuck at a certain percentage when uploading. The first time I tried, it got to 87% and then just sat there. Eventually, I unplugged it, plugged it back in and then tried again. It did eventually work.

On another one, the update went fine, but when I connected it back in the location where I used it in my house, it would continuously power cycle. The power light would come up, then the coax light would come on and then the coax light would go out about two seconds later. The power light would then go out and back on again and then the same thing with the coax light. On that one, I had to press and hold the reset button for about 10 seconds after disconnecting all cables and that fixed the problem.

If you’re reading this post several months after the date it was written, be sure to contact them directly at 888-436-0657 or fill out this online technical support form to get the latest firmware version emailed to you. If you have any questions, feel free to comment. Enjoy!

Related posts

• Laqabsiga Internetka iyo Baraha Bulshada

• Laguma xidhi karo Xbox Live; Hagaaji arrinta isku xirka Xbox Live gudaha Windows 10

• Aaladaha Shabakadda Wireless-ka ee bilaashka ah ee loogu talagalay Windows 10

• Aaladda Jilitaanka Isku-xidhka Xirmooyinka Baakidhka ee Cisco Packet iyo beddelaadkeeda bilaashka ah

• Sida loo joojiyo isku-xidhka gudaha Windows Sandbox gudaha Windows 10

• Sida looga fogaado oo loo xaliyo DNS go'annada

• Sida loo Helo kanaalka Wi-Fi ee ugu Wanaagsan Windows, Mac iyo Linux

• Dib-u-eegis Buugaag - Isku xidhka Guriga Dhammaan-in-Hal-Miis Tixraaca Dummies

• Waa maxay Firewall iyo maxay tahay ujeeddadiisu?

• Sida tooska ah ee HDMI u beddelashada u shaqeyso

• 8-da Goobood ee ugu Wanaagsan ee Isku-xirka Bulshada ee Xirfadlayaasha Ganacsiga Marka laga reebo LinkedIn

• Sida loo xakameeyo kombuyutarka Windows-ka iyadoo la isticmaalayo Desktop Fog ee Mac

• Isku-xidhka Peer to Peer (P2P) iyo Wadaagista Faylka ayaa la sharaxay

• Waa maxay 192.168.0.1, maxayse u tahay Ciwaanka IP-ga ee ugu tala galay inta badan Routers?

• Dib u eegis buug - Isku xirka Guriga Wireless ee Dummies

• Dib-u-eegis buug - Isku-xidhka Koowaad ee Madaxa

• Adapter Network Aan Shaqeyn? 12 shay oo la isku dayo

• Sida loogu isticmaalo Xbox Networking gudaha Windows 10, si loo hubiyo xidhiidhka aad la leedahay Xbox Live

• Waa maxay DHCP wakhtiga kirada iyo sida loo badalo

• Ma ku xidhi kartaa router-ka Wireless-ka, laakiin kuma xidhi kara internetka?