Haddii aad ku sugan tahay goob ganacsi oo yar, waxay noqon kartaa runtii wax laga xumaado haddii ay tahay inaad u baxdo kombiyuutar kasta oo aad u baahan tahay inaad hagaajiso. Taa baddalkeeda, haddii aad meel fog isku xiri karto oo aad hagaajin karto mashaakilaadka ama hagaajinta dejinta, waxay wax badan ka dhigeysaa mid ku habboon.

Inkastoo ay aad u yar tahay, waxaa jira waqtiyo aad u baahan karto inaad ku xirto kombiyuutar kale si aad u bedesho, u tirtirto ama ugu darto furayaasha diiwaanka iyo qiyamka. Sida iska cad, waxaad ka fogaan kartaa desktop-ka kombayutarka oo tan samee, laakiin haddii aad akhrinayso maqaalkan, kuma socon doontid jidkaas.

Maqaalkan, waxaan uga hadlayaa adeegga diiwaangelinta fog ee Windows kaas oo kuu oggolaanaya inaad si toos ah ugu xirto furayaasha diiwaanka kumbuyuutarka kale adoo isticmaalaya regedit. Si kastaba ha ahaatee, si ay taasi u shaqeyso, waxaa jira shuruudo dhowr ah.

Shuruudaha Diiwaangelinta Fog

Haddii aad rajaynayso inaad ku xidho kombuyuutar fog oo aanad geli karin, markaa nasiib baad leedahay. Si aad u isticmaasho Diiwaanka Fog^{(Remote Registry)} , waxaad asal ahaan u baahan tahay maamulaha gelitaanka labada kombiyuutar. Marka, tani asal ahaan waa ku raaxaysi oo looma isticmaali karo in lagu jabsado diiwaanka qof kale.

Waxaa jira dhowr shay oo ay tahay in ay jiraan ka hor inta aysan diiwaangelin fog xitaa shaqeynin:

1. Kumbuyuutarka aad ku xiran tahay waa inuu lahaadaa isticmaale iyo erayga sirta ah. Furaha sirta ah ma noqon karo maran.
2. Labada kombuyuutarba waxay u baahan yihiin in ay leeyihiin Maamulka^{(Remote Administration)} Fog ee dab-darka.
3. Labada kombiyuutarba waxay u baahan yihiin inay lahaadaan adeegga Diiwaangelinta Fog^{(Remote Registry)} ee shaqaynaya.

Shuruudda koowaad waa ay fududahay in la fuliyo. Kaliya^(Just) tag koontadaada ku dar furaha sirta ah, haddii uusan horay mid u lahayn. Shuruudda labaad waxaa lagu hagaajin karaa iyadoo la adeegsanayo degdegga amarka. Si aad u furto amarka maamulka, dhagsii Start , ku qor cmd oo midigta ku dhufo cmd oo dooro Run as Administrator .

Hadda koobi oo ku dheji amarka soo socda daaqada degdega ah ee amarka oo tabo Gelida^(Enter) .

netsh firewall set service RemoteAdmin

Waxaad heli doontaa fariin digniin ah oo amarku si guul leh u fuliyay, laakiin amarka netsh firewall waa la joojiyay. Waxaad ka heli doontaa fariintan Windows 7 , Windows 8 ama Windows 10. Dhib maaha ilaa inta ay si guul leh u dhammaatay. Ogow waa inaad ku socodsiisaa amarkan labada mishiin.

Shuruuda saddexaad, waxaad u baahan tahay inaad gujiso Start , ku qor adeegyada^(services) ka dibna dhagsii kaliya Adeegyada^(Services) leh labada calaamadood ee qalabka.

Hoos^(Scroll) u dhaadhac ilaa aad ka aragto Diiwaanka Fog (Remote Registry ) oo waa inaanu si caadi ah u socon. On Windows 10 , runtii waa la curyaami doonaa si caadi ah. Windows 7 , waxaad kaliya ku dhufan kartaa midigta oo dooro Start . On Windows 10 , waa inaad midig-gujisaa oo doorataa Properties marka hore.

Wadahadalka guryaha, waxaad u baahan tahay inaad u bedesho nooca Startup^{(Startup type)} wax aan ahayn Naafada^(Disabled) . Haddii aad u baahan tahay inaad tan samayso hal mar oo keliya, u beddel buug-gacmeedka^(Manual) . Haddii aad u baahan tahay inaad gasho diiwaanka fog inta badan, dooro otomaatig ah^(Automatic) .

Ka dib markaad doorato nooca bilowga, dhagsii badhanka Codso^(Apply) ka dibna badhanka bilawga^(Start) ma sii ahaan doono cawl. Guji Start si aad u bilowdo adeega diiwaangelinta fog. Mar labaad^(Again) , tani waxay u baahan tahay in lagu sameeyo labada mishiin.

Ku xidh Rugta Diiwaanka Fog

Markaad dhammayso dhammaan tillaabooyinka kore, waxaad isku dayi kartaa inaad ku xidho diiwaanka fog. Guji ^(Click)Start , ku qor regedit^(regedit) si aad u furto tifaftiraha diiwaanka. Marka xigta^(Next) , dhagsii File ka dibna dhagsii Connect Network Registry .

Halkan waa inaad ku qortaa magaca NETBIOS ee kombiyuutarka aad rabto inaad ku xidho.

Ogsoonow in aad si dhakhso ah u samayn karto raadinta dhammaan kombiyuutarada shabakada adigoo gujinaya Advanced ka dibna riixaya Find Now . Haddii kombayutarka aad ku xiran tahay uu leeyahay magac dheer, waxaad u baahan doontaa inaad go'aamiso magaca NETBIOS ee kombiyuutarka. Waxa aad taas samayn kartaa adiga oo kombuyutarkaas ka furaya amar degdeg ah oo ku qor nbtstat -n^{(nbtstat -n)} .

Marka aad ku qorto magaca oo aad gujiso OK, waxaa laguu soo jeedin doonaa inaad geliso magaca isticmaalaha iyo erayga sirta ah ee koontada maamulka ee kumbuyuutarka fog.

Ogsoonow in haddii aad ku xidhidhayso mishiinka Windows 10 meel fog lagana soo galo adiga oo isticmaalaya akoonkaaga Microsoft , waxa aad u baahantahay in aad ku qorto iimaylka magaca isticmaalaha iyo erayga sirta ah sida caadiga ah. Waa inaad rajaynaysaa inaad ku xidho diiwaanka kumbiyuutarka fog. Haddii aad hesho nooc kasta oo ah Farriinta La Diiday Gelitaanka^{(Access Denied)} , waxay la macno tahay inaad si khaldan u qortay waraaqaha aqoonsiga.

Sida aad kor ka arki karto, waxaan ku xidhay mashiinka Windows 7 anigoo isticmaalaya diiwaanka fog eeyga Windows 10 PC. Waxa kaliya oo aad arki doonta HKEY_LOCAL_MACHINE iyo HKEY_USERS marka lagu xidho diiwaanka fog Haddii aad wax su'aalo ah qabtid ama aad la kulanto wax dhibaato ah, ku dheji faallooyinka waxaan isku dayi doonaa inaan ku caawiyo. Ku raaxayso!

How to Connect to a Remote Registry in Windows 7 and 10

If you’re in a small business environment, it can become really annoying if you have to walk oυt to each computer that you need to fіx. Instead, if you can remotely connect and fix problems or adjυst settings, it makes things a lot more convenient.

Though it’s less common, there are times when you might need to connect to another computer to change, delete or add registry keys and values. Obviously, you could remote desktop into the computer and do this, but if you’re reading this article, you aren’t going that route.

In this article, I’m going to talk about the remote registry service in Windows that allows you to connect directly to the registry hives on another computer using regedit. However, in order for this to work, there are several prerequisites.

Remote Registry Requirements

If you’re hoping to connect to a remote computer that you don’t have access to, then you’re out of luck. In order to use Remote Registry, you basically need administrator access to both computers. So, this is basically for convenience and can’t be used to hack into someone else’s registry.

There are a couple of things that have to be in place before remote registry will even work:

1. The computer you are connecting to has to have a username and password. The password cannot be blank.
2. Both computers need to have Remote Administration enabled in the firewall.
3. Both computers need to have the Remote Registry service running.

The first requirement is easy to fulfill. Just go add a password to your account, if it doesn’t already have one. The second requirement can be fixed using the command prompt. To open an administrator command prompt, click on Start, type cmd and right-click on cmd and choose Run as Administrator.

Now copy and paste the following command into the command prompt window and press Enter.

netsh firewall set service RemoteAdmin

You’ll get a warning message that the command executed successfully, but the netsh firewall command is deprecated. You will get this message on Windows 7, Windows 8 or Windows 10. It’s not a problem as long as it completed successfully. Note that you have to run this command on both machines.

For the third requirement, you need to click on Start, type in services and then click on just Services with the two gear icons.

Scroll down till you see Remote Registry and it should not be running by default. On Windows 10, it’ll actually be disabled by default. On Windows 7, you can just right-click on it and choose Start. On Windows 10, you’ll have to right-click and choose Properties first.

In the properties dialog, you need to change the Startup type to something other than Disabled. If you need to do this only one time, change it to Manual. If you need to access the remote registry often, choose Automatic.

After you select the startup type, click the Apply button and then the Start button will no longer be greyed out. Click Start to start the remote registry service. Again, this needs to be done on both machines.

Connect to Remote Registry Hive

Once you have completed all the steps above, you can try to connect to the remote registry. Click on Start, type regedit to open the registry editor. Next, click on File and then click on Connect Network Registry.

Here you will have to type in the NETBIOS name of the computer that you want to connect to.

Note that you can quickly perform a search for all computers on the network by clicking on Advanced and then clicking on Find Now. If the computer you are connecting to has a long name, you’ll need to determine the NETBIOS name for the computer. You can do this by opening a command prompt on that computer and typing in nbtstat -n.

Once you type the name in and click OK, you will be prompted to enter the username and password for an administrator account on the remote computer.

Note that if you are connecting to a Windows 10 machine remotely and it’s logged in using your Microsoft account, you need to type the email address for the username and the password as usual. You should hopefully get connected to the registry on the remote computer. If you get any kind of Access Denied message, it means you must have typed in the credentials wrong.

As you can see from above, I connected to a Windows 7 machine using remote registry from my Windows 10 PC. You’ll only see HKEY_LOCAL_MACHINE and HKEY_USERS when connected to a remote registry. If you have any questions or run into any problems, post a comment and I’ll try to help. Enjoy!

Related posts

• Sida looga cusboonaysiiyo Windows 7 loona cusboonaysiiyo Windows 10 adoon lumin xogta

• Sida loo sugo Windows 7 ka dib dhamaadka taageerada

• Ku rakib oo ka shaqay Windows 7 furayaasha ESU aalado badan adoo isticmaalaya MAK

• Windows 7 Talooyinka dhamaadka Nolosha - Maxaa xiga!?

• Sida looga soo dejiyo qoraalada dhejiska ah ee Windows 7 una soo dejiso Windows 11/10

• Sida loo isticmaalo Snipping Tool for Windows 10 iyo Windows 7 -

• Sida loogula tacaalo faylalka XPS Viewer XPS gudaha Windows 7 ama Windows 8

• Sida loo cusboonaysiiyo Windows 11/10 ka Windows 7 ama Windows 8.1 Free

• Sida loo abuuro Liis-bood-boodkaaga gaarka ah gudaha Windows 7 & Windows 8.1

• Sida Loo Beddelayo Ururada Faylka ee Windows 7 Iyo Windows 8.1

• Habee Hawsha, Aagga Ogeysiinta iyo Xarunta Waxqabadka gudaha Windows 10

• Sida loo isticmaalo Taskbar gudaha Windows 7 iyo Windows 8.1

• U beddelo Shabakadda Dadweynaha una beddelo Shabakadda Gaarka ah ee Windows 7, 8 iyo 10

• Sida loo beddelo isku xirka shabakada firfircoon ee Windows 7

• Sida loogu daabaco daabacaha Mac OS X la wadaago ee ka socda Windows 7 & Windows 8

• Sida loo cusboonaysiiyo Windows 8 laga bilaabo Windows 7, Windows Vista ama ka hor

• Talooyinka Geek ee Maareynta Xidhiidhada Shabakadaha Wireless-ka ee Windows 7

• Shuruudaha RAM ee Windows 10 iyo Windows 7 - Intee in le'eg xusuusta ayaad u baahan tahay?

• Soo deji mawduucyada horudhaca ee Windows 8 ee Windows 7

• Dib-u-eegis buug - Ku- xisaabinta Windows 7 ee Waayeelka iyo Caqliga